Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare

Fans

Fans MMF-06D24DS-RC7 case fan 60x60x25mm 24VDC 0.09A

SKU CH-RQJD-HYG5M MPN MMF-06D24DS-RC7

A 60 mm square axial case fan running on 24 VDC at 0.09 A with a three-wire speed detection function

  • Compact 60x60x25 mm frame fits tight spaces
  • 24 VDC operation suits industrial power rails
  • Low 0.09 A draw reduces supply load
  • Three-wire tachometer enables speed monitoring
  • Axial design delivers efficient airflow for cooling

Mitsubishi 60 mm 24 VDC axial fan

This Mitsubishi MMF-06D24DS-RC7 is a 60 by 60 by 25 mm axial case fan that runs on 24 VDC and draws 0.09 A. It uses a three-wire connection with a speed detection function. The compact frame suits tight chassis spaces or industrial enclosures.

Suits 24 V systems needing tach feedback

Builders working with a 24 VDC rail who require a tachometer signal for monitoring will find this unit a direct fit. Systems that only provide a different voltage rail or demand a four-wire PWM control interface cannot use this fan as supplied.

Three-wire detection at 0.09 A

The single deciding specification is the three-wire interface that delivers speed detection at a rated 0.09 A current draw. Match both the voltage and the connector pin-out to your controller before ordering.

Puncte forte

  • Compact 60x60x25 mm frame fits tight spaces
  • 24 VDC operation suits industrial power rails
  • Low 0.09 A draw reduces supply load
  • Three-wire tachometer enables speed monitoring
  • Axial design delivers efficient airflow for cooling

Specificații

Nicio specificație publicată pentru acest articol deocamdată.

Întrebări despre acest articol

What does the three-wire interface with detection provide on this 24 VDC fan?

The third wire carries a speed signal so the controller can monitor RPM and trigger alarms if the fan stalls.

What mounting dimensions does the 60 mm square frame require?

Four screw holes on a 60 mm pitch with a 25 mm depth clearance for the frame.

How is the fan wired into a Yaskawa inverter system?

Connect red to 24 VDC, black to ground, and the yellow sense wire to the inverter’s fan feedback input; power on only after all three leads are seated.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.