Vi tar imot kryptovaluta — slik kan kryptovalutaene du eier, kjøpe ekte maskinvare.Betal med krypto, bruk den på ekte maskinvare. Gratis, forsikret levering verden over for bestillinger over 399 $. Nøytrale kartonger uten merking, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Kursen din er låst i 30 minutter når kassen åpnes.Kurs låst i 30 minutter. Alle varer er forseglet, serienummerkontrollert og dekket av 24 måneders garanti.Forseglet, 24 måneders garanti.

Overvåkingsliste Logg inn
Green rectangular PCB with gold edge connector, surface-mount chips, pin headers, and three small LEDs

LORDWORLD

LORDWORLD UPS HAT for Raspberry Pi Pico development board

SKU CH-5F2V-0C701

Adds uninterruptible power with Li-ion charging, I2C battery monitoring, and multi-level protection to Raspberry Pi Pico boards

  • Stable power with dynamic path management and Li-ion switching charger
  • Real-time battery monitoring over I2C for voltage, current, power and capacity
  • Comprehensive safety with over-charge, over-discharge, over-current, short-circuit and reverse protection
  • Instant status via onboard charging, power and battery warning indicators
  • Ready-to-use C/C++ and MicroPython examples for Raspberry Pi Pico series

UPS HAT for Raspberry Pi Pico

The LORDWORLD UPS HAT adds uninterruptible power to Raspberry Pi Pico series boards through a standard header. It integrates a Li-ion battery switching charger with dynamic power path management to maintain a stable 5 V supply during mains loss. The board is designed for makers and IoT developers who need continuous operation without manual intervention.

I2C monitoring and protection circuits

Real-time battery voltage, current, power and remaining capacity are reported over the I2C bus for software-level awareness. Multiple hardware safeguards provide over-charge, over-discharge, over-current, short-circuit and reverse-polarity protection alongside an equalising charge function. Onboard LEDs indicate charging status, power presence and battery connection health.

Li-ion chemistry and header constraints

The module only supports single-cell Li-ion batteries and relies on the Pico header for mechanical and electrical connection. It cannot power loads that exceed the Pico header current rating or the charger’s output capability. Developers needing hot-swap redundancy, higher voltages or non-Li-ion chemistries must look elsewhere.

Høydepunkter

  • Stable power with dynamic path management and Li-ion switching charger
  • Real-time battery monitoring over I2C for voltage, current, power and capacity
  • Comprehensive safety with over-charge, over-discharge, over-current, short-circuit and reverse protection
  • Instant status via onboard charging, power and battery warning indicators
  • Ready-to-use C/C++ and MicroPython examples for Raspberry Pi Pico series

Spesifikasjoner

BrandLORDWORLD

Spørsmål om denne varen

Does the Li-ion battery on this UPS HAT need periodic replacement, and how is it charged?

The board includes a switching charger with dynamic power path management that charges a connected Li-ion cell over the I2C bus; the cell itself is not supplied, so you choose the capacity and replace it when its runtime drops below your needs.

What limits continuous operation when the Raspberry Pi Pico draws sustained current through the HAT?

The multi protection circuits enforce over-current, over-charge, over-discharge and short-circuit thresholds; the first limit reached will cut power to protect the battery and the Pico.

How much noise or heat does the HAT generate when it runs all day powering a Pico?

The module has no fan or moving parts, so it is silent; only the onboard charger and protection MOSFETs warm slightly under load, and the three status LEDs give visual feedback without adding audible noise.

Også i denne avdelingen

Kunder sammenlignet disse

Samme hylle, samme kasse — åtte mynter og 30 minutters kurslås.