Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Green rectangular PCB with gold edge connector, surface-mount chips, pin headers, and three small LEDs

LORDWORLD

LORDWORLD UPS HAT for Raspberry Pi Pico development board

SKU CH-5F2V-0C701

Adds uninterruptible power with Li-ion charging, I2C battery monitoring, and multi-level protection to Raspberry Pi Pico boards

  • Stable power with dynamic path management and Li-ion switching charger
  • Real-time battery monitoring over I2C for voltage, current, power and capacity
  • Comprehensive safety with over-charge, over-discharge, over-current, short-circuit and reverse protection
  • Instant status via onboard charging, power and battery warning indicators
  • Ready-to-use C/C++ and MicroPython examples for Raspberry Pi Pico series

UPS HAT for Raspberry Pi Pico

The LORDWORLD UPS HAT adds uninterruptible power to Raspberry Pi Pico series boards through a standard header. It integrates a Li-ion battery switching charger with dynamic power path management to maintain a stable 5 V supply during mains loss. The board is designed for makers and IoT developers who need continuous operation without manual intervention.

I2C monitoring and protection circuits

Real-time battery voltage, current, power and remaining capacity are reported over the I2C bus for software-level awareness. Multiple hardware safeguards provide over-charge, over-discharge, over-current, short-circuit and reverse-polarity protection alongside an equalising charge function. Onboard LEDs indicate charging status, power presence and battery connection health.

Li-ion chemistry and header constraints

The module only supports single-cell Li-ion batteries and relies on the Pico header for mechanical and electrical connection. It cannot power loads that exceed the Pico header current rating or the charger’s output capability. Developers needing hot-swap redundancy, higher voltages or non-Li-ion chemistries must look elsewhere.

Přednosti

  • Stable power with dynamic path management and Li-ion switching charger
  • Real-time battery monitoring over I2C for voltage, current, power and capacity
  • Comprehensive safety with over-charge, over-discharge, over-current, short-circuit and reverse protection
  • Instant status via onboard charging, power and battery warning indicators
  • Ready-to-use C/C++ and MicroPython examples for Raspberry Pi Pico series

Specifikace

BrandLORDWORLD

Otázky k tomuto produktu

Does the Li-ion battery on this UPS HAT need periodic replacement, and how is it charged?

The board includes a switching charger with dynamic power path management that charges a connected Li-ion cell over the I2C bus; the cell itself is not supplied, so you choose the capacity and replace it when its runtime drops below your needs.

What limits continuous operation when the Raspberry Pi Pico draws sustained current through the HAT?

The multi protection circuits enforce over-current, over-charge, over-discharge and short-circuit thresholds; the first limit reached will cut power to protect the battery and the Pico.

How much noise or heat does the HAT generate when it runs all day powering a Pico?

The module has no fan or moving parts, so it is silent; only the onboard charger and protection MOSFETs warm slightly under load, and the three status LEDs give visual feedback without adding audible noise.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.