BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
Vi tar imot kryptovaluta — slik kan kryptovalutaene du eier, kjøpe ekte maskinvare.Betal med krypto, bruk den på ekte maskinvare. Gratis, forsikret levering verden over for bestillinger over 399 $. Nøytrale kartonger uten merking, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Kursen din er låst i 30 minutter når kassen åpnes.Kurs låst i 30 minutter. Alle varer er forseglet, serienummerkontrollert og dekket av 24 måneders garanti.Forseglet, 24 måneders garanti.
Supermicro
A 1U rackmount chassis holding two 3.5″ drives with a 200W supply and one expansion slot
The Supermicro CSE-512L-200B is a 1U rackmount server chassis that fits a maximum 12" x 9.6" ATX motherboard and supports a single Intel or AMD processor. It ships with a 200W multi-output power supply and a 10cm PWM blower fan rated at 3,800 RPM. The 14" depth makes it suitable for shorter rack cabinets.
The chassis provides two internal 3.5" drive bays fixed in place, with the manufacturer recommending SAS or enterprise SATA hard drives only. A single full-height half-length expansion slot is available but requires a separate riser card to install an add-in card. Front-panel controls include power and reset buttons plus five status LEDs.
Confirm your motherboard does not exceed the 12" x 9.6" ATX maximum, as larger boards will not fit the 1U form factor. Ensure you have SAS or enterprise SATA hard drives, since consumer SATA drives are not recommended for this chassis. Check that a compatible riser card is sourced if you plan to use the expansion slot.
| Brand | SUPERMICRO |
|---|---|
| Series | SuperChassis |
| Model | CSE-512L-200B |
| Chassis Type | Rackmount |
| Form Factor | 1U |
| Color | Black |
| Motherboard Compatibility | 12" x 9.6" ATX (max.) |
| Power Supply | 200W |
| Internal 3.5" Drive Bays | 2 |
| Expansion Slots | 1 x full-height half-length expansion slot (Riser Card Required) |
| Features | Processor Support: Supports single Intel / AMD processor. SAS or enterprise SATA HDD only recommended Buttons: Power On/Off button System Reset button LEDs: Power LED Hard drive activity LED 2x Network activity LEDs System Overheat LED 1 x 10cm 3,800 RPM PWM blower fan 200W Low Noise AC-DC power supply with PFC |
| Dimensions | 16.8" x 14.0" x 1.7" |
| Package Contents | DN7134 |
| Fraktvekt | 5.92 kg |
| Pakkestørrelse | 566 × 516 × 170 mm |
The 10 cm 3800 RPM PWM blower fan is the only active cooling component; plan to replace it when bearing noise increases or airflow drops below what the chassis requires.
The 200 W multi-output supply will reach its rated output before the 35 °C ambient limit becomes the constraining factor.
The single 10 cm 3800 RPM PWM blower moves enough air for the 200 W supply and two 3.5″ drives, but sustained operation at full speed produces noticeable airflow noise and exhaust heat within the 5 °C–35 °C operating range.
Også i denne avdelingen
Samme hylle, samme kasse — åtte mynter og 30 minutters kurslås.
Det du betaler med, og det du ser prisene i.
Sendes fra lommeboken din i kassen
Kun visning — katalogen er prissatt i USD
Fant ingen valuta.
Velg språket nettstedet snakker til deg på.
Ingen språk samsvarer.
Ny her?
Har du allerede en konto?
Det finnes ingen automatisk tilbakestilling: butikken sender ikke e-post, så det finnes ingen engangslenke å be om. La adressen stå på kontoen, så blir den behandlet manuelt.
Forespørsel registrert
Ingenting er på vei til innboksen din — butikken sender ingen e-post i det hele tatt. Noen behandler dette manuelt.
Husket du det likevel?