BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.
Supermicro
A 1U rackmount chassis holding two 3.5″ drives with a 200W supply and one expansion slot
The Supermicro CSE-512L-200B is a 1U rackmount server chassis that fits a maximum 12" x 9.6" ATX motherboard and supports a single Intel or AMD processor. It ships with a 200W multi-output power supply and a 10cm PWM blower fan rated at 3,800 RPM. The 14" depth makes it suitable for shorter rack cabinets.
The chassis provides two internal 3.5" drive bays fixed in place, with the manufacturer recommending SAS or enterprise SATA hard drives only. A single full-height half-length expansion slot is available but requires a separate riser card to install an add-in card. Front-panel controls include power and reset buttons plus five status LEDs.
Confirm your motherboard does not exceed the 12" x 9.6" ATX maximum, as larger boards will not fit the 1U form factor. Ensure you have SAS or enterprise SATA hard drives, since consumer SATA drives are not recommended for this chassis. Check that a compatible riser card is sourced if you plan to use the expansion slot.
| Brand | SUPERMICRO |
|---|---|
| Series | SuperChassis |
| Model | CSE-512L-200B |
| Chassis Type | Rackmount |
| Form Factor | 1U |
| Color | Black |
| Motherboard Compatibility | 12" x 9.6" ATX (max.) |
| Power Supply | 200W |
| Internal 3.5" Drive Bays | 2 |
| Expansion Slots | 1 x full-height half-length expansion slot (Riser Card Required) |
| Features | Processor Support: Supports single Intel / AMD processor. SAS or enterprise SATA HDD only recommended Buttons: Power On/Off button System Reset button LEDs: Power LED Hard drive activity LED 2x Network activity LEDs System Overheat LED 1 x 10cm 3,800 RPM PWM blower fan 200W Low Noise AC-DC power supply with PFC |
| Dimensions | 16.8" x 14.0" x 1.7" |
| Package Contents | DN7134 |
| Fraktvikt | 5.92 kg |
| Paketstorlek | 566 × 516 × 170 mm |
The 10 cm 3800 RPM PWM blower fan is the only active cooling component; plan to replace it when bearing noise increases or airflow drops below what the chassis requires.
The 200 W multi-output supply will reach its rated output before the 35 °C ambient limit becomes the constraining factor.
The single 10 cm 3800 RPM PWM blower moves enough air for the 200 W supply and two 3.5″ drives, but sustained operation at full speed produces noticeable airflow noise and exhaust heat within the 5 °C–35 °C operating range.
Även i den här avdelningen
Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.
Det du betalar med, och det du ser priserna i.
Skickas från din plånbok i kassan
Endast visning — katalogen är prissatt i US-dollar
Ingen valuta matchar.
Välj det språk du vill att webbplatsen ska visas på.
Inga språk matchar.
Ny här?
Har du redan ett konto?
Det finns ingen automatisk återställning: den här butiken skickar inga e-postmeddelanden, så det finns ingen engångslänk att begära. Lämna adressen kopplad till kontot, så hanteras den för hand.
Förfrågan noterad
Inget är på väg till din inkorg — den här butiken skickar aldrig e-post. Någon tar hand om detta manuellt.
Kom du på det?