BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
Supermicro
A 1U rackmount chassis holding two 3.5″ drives with a 200W supply and one expansion slot
The Supermicro CSE-512L-200B is a 1U rackmount server chassis that fits a maximum 12" x 9.6" ATX motherboard and supports a single Intel or AMD processor. It ships with a 200W multi-output power supply and a 10cm PWM blower fan rated at 3,800 RPM. The 14" depth makes it suitable for shorter rack cabinets.
The chassis provides two internal 3.5" drive bays fixed in place, with the manufacturer recommending SAS or enterprise SATA hard drives only. A single full-height half-length expansion slot is available but requires a separate riser card to install an add-in card. Front-panel controls include power and reset buttons plus five status LEDs.
Confirm your motherboard does not exceed the 12" x 9.6" ATX maximum, as larger boards will not fit the 1U form factor. Ensure you have SAS or enterprise SATA hard drives, since consumer SATA drives are not recommended for this chassis. Check that a compatible riser card is sourced if you plan to use the expansion slot.
| Brand | SUPERMICRO |
|---|---|
| Series | SuperChassis |
| Model | CSE-512L-200B |
| Chassis Type | Rackmount |
| Form Factor | 1U |
| Color | Black |
| Motherboard Compatibility | 12" x 9.6" ATX (max.) |
| Power Supply | 200W |
| Internal 3.5" Drive Bays | 2 |
| Expansion Slots | 1 x full-height half-length expansion slot (Riser Card Required) |
| Features | Processor Support: Supports single Intel / AMD processor. SAS or enterprise SATA HDD only recommended Buttons: Power On/Off button System Reset button LEDs: Power LED Hard drive activity LED 2x Network activity LEDs System Overheat LED 1 x 10cm 3,800 RPM PWM blower fan 200W Low Noise AC-DC power supply with PFC |
| Dimensions | 16.8" x 14.0" x 1.7" |
| Package Contents | DN7134 |
| وزن الشحنة | 5.92 kg |
| أبعاد الطرد | 566 × 516 × 170 mm |
The 10 cm 3800 RPM PWM blower fan is the only active cooling component; plan to replace it when bearing noise increases or airflow drops below what the chassis requires.
The 200 W multi-output supply will reach its rated output before the 35 °C ambient limit becomes the constraining factor.
The single 10 cm 3800 RPM PWM blower moves enough air for the 200 W supply and two 3.5″ drives, but sustained operation at full speed produces noticeable airflow noise and exhaust heat within the 5 °C–35 °C operating range.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
لا توجد لغة مطابقة.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟