Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Green circuit board with black memory chips and gold edge connector

A-Tech

A-Tech 8GB DDR4 2400 ECC UDIMM 2Rx8 Server Memory Hynix HMA41GU7AFR8N-UH

SKU CH-50BD-QRBV3

8GB DDR4 2400MHz ECC UDIMM server memory module with CL17 latency and 1.20V operation

  • Capacity8GB
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredUnbuffered
  • 8 GB capacity handles larger workloads
  • DDR4 2400 MHz speed accelerates data transfer
  • ECC UDIMM detects and corrects memory errors
  • 2 V operation reduces power consumption
  • 288-pin DIMM fits standard server slots

8GB DDR4 ECC UDIMM for Servers

This 8GB DDR4 2400 ECC UDIMM module targets administrators who need to add reliable memory to compatible servers or workstations. It delivers error-correcting code protection without registered buffering. The unbuffered design suits platforms that accept UDIMM population rules.

Replaces Hynix HMA41GU7AFR8N-UH

The module is a direct equivalent for the Hynix HMA41GU7AFR8N-UH part number. Upgrading makes sense when a system currently runs lower-capacity DDR4 ECC UDIMMs at 2400 MT/s and the board supports 2Rx8 organisation. Verify the platform's qualified-vendor list before ordering.

Fits 288-pin DDR4 slots at 1.2V

Installation requires an available 288-pin DDR4 DIMM slot that accepts unbuffered ECC memory at 1.20V. The single 8GB stick leaves remaining slots free for further expansion within the motherboard's maximum capacity. Confirm the system's supported rank and speed configuration before installation.

Puncte forte

  • 8 GB capacity handles larger workloads
  • DDR4 2400 MHz speed accelerates data transfer
  • ECC UDIMM detects and corrects memory errors
  • 2 V operation reduces power consumption
  • 288-pin DIMM fits standard server slots

Specificații

BrandA-Tech
Capacity8GB
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Voltage1.20V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Întrebări despre acest articol

What DDR4 slot and pin count does this 288-pin UDIMM require?

It fits a standard DDR4 DIMM slot with 288 pins and operates at 1.20 V.

Which notch orientation and seating pressure avoid a partial install?

Align the single off-centre notch with the slot key, press straight down until both side clips click, and verify the module sits flush.

When should this ECC module be replaced if correctable errors appear?

Replace the module if the system logs show a rising correctable-error count or if memory diagnostics report persistent failures.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.