Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Green circuit board with black memory chips and gold edge connector

A-Tech

A-Tech 8GB DDR4 2400 ECC UDIMM 2Rx8 Server Memory Hynix HMA41GU7AFR8N-UH

SKU CH-50BD-QRBV3

8GB DDR4 2400MHz ECC UDIMM server memory module with CL17 latency and 1.20V operation

  • Capacity8GB
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredUnbuffered
  • 8 GB capacity handles larger workloads
  • DDR4 2400 MHz speed accelerates data transfer
  • ECC UDIMM detects and corrects memory errors
  • 2 V operation reduces power consumption
  • 288-pin DIMM fits standard server slots

8GB DDR4 ECC UDIMM for Servers

This 8GB DDR4 2400 ECC UDIMM module targets administrators who need to add reliable memory to compatible servers or workstations. It delivers error-correcting code protection without registered buffering. The unbuffered design suits platforms that accept UDIMM population rules.

Replaces Hynix HMA41GU7AFR8N-UH

The module is a direct equivalent for the Hynix HMA41GU7AFR8N-UH part number. Upgrading makes sense when a system currently runs lower-capacity DDR4 ECC UDIMMs at 2400 MT/s and the board supports 2Rx8 organisation. Verify the platform's qualified-vendor list before ordering.

Fits 288-pin DDR4 slots at 1.2V

Installation requires an available 288-pin DDR4 DIMM slot that accepts unbuffered ECC memory at 1.20V. The single 8GB stick leaves remaining slots free for further expansion within the motherboard's maximum capacity. Confirm the system's supported rank and speed configuration before installation.

Punti di forza

  • 8 GB capacity handles larger workloads
  • DDR4 2400 MHz speed accelerates data transfer
  • ECC UDIMM detects and corrects memory errors
  • 2 V operation reduces power consumption
  • 288-pin DIMM fits standard server slots

Caratteristiche tecniche

BrandA-Tech
Capacity8GB
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Voltage1.20V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Domande su questo articolo

What DDR4 slot and pin count does this 288-pin UDIMM require?

It fits a standard DDR4 DIMM slot with 288 pins and operates at 1.20 V.

Which notch orientation and seating pressure avoid a partial install?

Align the single off-centre notch with the slot key, press straight down until both side clips click, and verify the module sits flush.

When should this ECC module be replaced if correctable errors appear?

Replace the module if the system logs show a rising correctable-error count or if memory diagnostics report persistent failures.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.