Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Green circuit board with black memory chips and gold edge connector

A-Tech

A-Tech 8GB DDR4 2400 ECC UDIMM 2Rx8 Server Memory Hynix HMA41GU7AFR8N-UH

SKU CH-50BD-QRBV3

8GB DDR4 2400MHz ECC UDIMM server memory module with CL17 latency and 1.20V operation

  • Capacity8GB
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredUnbuffered
  • 8 GB capacity handles larger workloads
  • DDR4 2400 MHz speed accelerates data transfer
  • ECC UDIMM detects and corrects memory errors
  • 2 V operation reduces power consumption
  • 288-pin DIMM fits standard server slots

8GB DDR4 ECC UDIMM for Servers

This 8GB DDR4 2400 ECC UDIMM module targets administrators who need to add reliable memory to compatible servers or workstations. It delivers error-correcting code protection without registered buffering. The unbuffered design suits platforms that accept UDIMM population rules.

Replaces Hynix HMA41GU7AFR8N-UH

The module is a direct equivalent for the Hynix HMA41GU7AFR8N-UH part number. Upgrading makes sense when a system currently runs lower-capacity DDR4 ECC UDIMMs at 2400 MT/s and the board supports 2Rx8 organisation. Verify the platform's qualified-vendor list before ordering.

Fits 288-pin DDR4 slots at 1.2V

Installation requires an available 288-pin DDR4 DIMM slot that accepts unbuffered ECC memory at 1.20V. The single 8GB stick leaves remaining slots free for further expansion within the motherboard's maximum capacity. Confirm the system's supported rank and speed configuration before installation.

Prednosti

  • 8 GB capacity handles larger workloads
  • DDR4 2400 MHz speed accelerates data transfer
  • ECC UDIMM detects and corrects memory errors
  • 2 V operation reduces power consumption
  • 288-pin DIMM fits standard server slots

Špecifikácie

BrandA-Tech
Capacity8GB
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Voltage1.20V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Otázky k tomuto produktu

What DDR4 slot and pin count does this 288-pin UDIMM require?

It fits a standard DDR4 DIMM slot with 288 pins and operates at 1.20 V.

Which notch orientation and seating pressure avoid a partial install?

Align the single off-centre notch with the slot key, press straight down until both side clips click, and verify the module sits flush.

When should this ECC module be replaced if correctable errors appear?

Replace the module if the system logs show a rising correctable-error count or if memory diagnostics report persistent failures.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.