Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Square grey thermal pad sheet 100x100x1.5mm

Alphacool

Alphacool Ice Thermal Pad 11W/mK 100x100x1.5mm Grey

SKU CH-Q0SE-PFYZ8

High-conductivity 11 W/mK thermal pad measuring 100 × 100 × 1.5 mm for GPU, CPU or RAM cooling

  • FeaturesAlphacool’s ultimate solution to cool your computer with a l
  • High thermal conductivity of 11W/mK efficiently transfers heat from components
  • Generous 100x100mm size covers large chip areas in a single piece
  • 5mm thickness bridges wider gaps between dies and heatsinks
  • Self-adhesive and elastic material simplifies installation on uneven surfaces
  • Easily cut with scissors to fit custom component shapes precisely

Thermal pad for component cooling

The Alphacool Ice thermal pad is a self-adhesive, elastic sheet designed to transfer heat between computer components and heatsinks. It suits builders who need a clean, reusable alternative to thermal paste for RAM modules, graphics cards, motherboard chipsets or CPU coolers. The grey material can be cut with scissors to fit individual component shapes.

11 W/mK conductivity and 1.5 mm thickness

This specific pad delivers a thermal conductivity of 11 W/mK at a thickness of 1.5 mm, placing it at the entry level of Alphacool's Eisschicht range which also offers 14 W/mK and 17 W/mK variants. The 1.5 mm profile is intended to bridge larger gaps between uneven surfaces where thinner 0.5 mm or 1 mm pads would not make full contact.

100x100 mm sheet cut to size

Each pad measures 100x100 mm, providing enough material for multiple small components or a single large die. The sheet is easily trimmed with scissors so builders can create custom shapes for VRM arrays, memory chips or GPU cores without waste. No additional mounting hardware or adhesive is required beyond the pad's own tacky surfaces.

Puncte forte

  • High thermal conductivity of 11W/mK efficiently transfers heat from components
  • Generous 100x100mm size covers large chip areas in a single piece
  • 5mm thickness bridges wider gaps between dies and heatsinks
  • Self-adhesive and elastic material simplifies installation on uneven surfaces
  • Easily cut with scissors to fit custom component shapes precisely

Specificații

BrandAlphacool
Model1011297
Part Number1011297
FeaturesAlphacool’s ultimate solution to cool your computer with a layer of ice. Not frozen water but a sensational new thermal pad.

Întrebări despre acest articol

What does the 11 W/mK conductivity mean when the pad sits between a GPU die and its cooler?

It moves heat across the 1.5 mm thickness faster than standard pads, lowering the junction temperature under load.

Is there an industry standard that caps the 11 W/mK rating in real use?

No universal standard limits the rating; actual transfer depends on mounting pressure, surface flatness and the cooler’s own resistance.

Will the 100×100 mm sheet cover a full-length graphics-card backplate, or must I cut it?

The sheet is 100×100 mm; measure your backplate — if it exceeds those dimensions you will need to trim the pad with scissors.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.