暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Square grey thermal pad sheet 100x100x1.5mm

Alphacool

Alphacool Ice Thermal Pad 11W/mK 100x100x1.5mm Grey

SKU CH-Q0SE-PFYZ8

High-conductivity 11 W/mK thermal pad measuring 100 × 100 × 1.5 mm for GPU, CPU or RAM cooling

  • FeaturesAlphacool’s ultimate solution to cool your computer with a l
  • High thermal conductivity of 11W/mK efficiently transfers heat from components
  • Generous 100x100mm size covers large chip areas in a single piece
  • 5mm thickness bridges wider gaps between dies and heatsinks
  • Self-adhesive and elastic material simplifies installation on uneven surfaces
  • Easily cut with scissors to fit custom component shapes precisely

Thermal pad for component cooling

The Alphacool Ice thermal pad is a self-adhesive, elastic sheet designed to transfer heat between computer components and heatsinks. It suits builders who need a clean, reusable alternative to thermal paste for RAM modules, graphics cards, motherboard chipsets or CPU coolers. The grey material can be cut with scissors to fit individual component shapes.

11 W/mK conductivity and 1.5 mm thickness

This specific pad delivers a thermal conductivity of 11 W/mK at a thickness of 1.5 mm, placing it at the entry level of Alphacool's Eisschicht range which also offers 14 W/mK and 17 W/mK variants. The 1.5 mm profile is intended to bridge larger gaps between uneven surfaces where thinner 0.5 mm or 1 mm pads would not make full contact.

100x100 mm sheet cut to size

Each pad measures 100x100 mm, providing enough material for multiple small components or a single large die. The sheet is easily trimmed with scissors so builders can create custom shapes for VRM arrays, memory chips or GPU cores without waste. No additional mounting hardware or adhesive is required beyond the pad's own tacky surfaces.

特長

  • High thermal conductivity of 11W/mK efficiently transfers heat from components
  • Generous 100x100mm size covers large chip areas in a single piece
  • 5mm thickness bridges wider gaps between dies and heatsinks
  • Self-adhesive and elastic material simplifies installation on uneven surfaces
  • Easily cut with scissors to fit custom component shapes precisely

仕様

BrandAlphacool
Model1011297
Part Number1011297
FeaturesAlphacool’s ultimate solution to cool your computer with a layer of ice. Not frozen water but a sensational new thermal pad.

この商品に関する質問

What does the 11 W/mK conductivity mean when the pad sits between a GPU die and its cooler?

It moves heat across the 1.5 mm thickness faster than standard pads, lowering the junction temperature under load.

Is there an industry standard that caps the 11 W/mK rating in real use?

No universal standard limits the rating; actual transfer depends on mounting pressure, surface flatness and the cooler’s own resistance.

Will the 100×100 mm sheet cover a full-length graphics-card backplate, or must I cut it?

The sheet is 100×100 mm; measure your backplate — if it exceeds those dimensions you will need to trim the pad with scissors.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。