Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Metal enclosure with eight fused output terminals and power supply labels

ALTRONIX

ALTRONIX ACM Series 8 Fused Outputs Power Supply/Charger 12/24 VDC 4/3 Amps

SKU CH-5VFH-KVTVP

Distributes 12 or 24 VDC at 4 or 3 amps across eight fused outputs with fire-alarm disconnect and overload protection

  • TypeOther
  • Fire alarm disconnect selectable per output for flexible safety integration
  • Short circuit and thermal overload protection prevents equipment damage
  • Filtered and electronically regulated outputs deliver clean power
  • Alarm output relay signals FACP trigger with form C contact
  • Lifetime warranty provides long-term reliability assurance

Access power controller with eight fused outputs

The ALTRONIX ACM Series unit is an access power controller that provides eight individually fused outputs for security and fire-alarm installations. It suits installers who need a single enclosure to distribute regulated 12 or 24 VDC power to multiple devices such as door strikes, readers or alarm modules.

Dual-voltage supply rated at 4 amps on 12 V

The built-in power supply delivers filtered, electronically regulated output at either 12 VDC or 24 VDC. At 12 V it provides up to 4 amps of total current; at 24 V the available current drops to 3 amps. Installers must size the load so the combined draw across all eight outputs stays within the chosen voltage rating.

Fire-alarm disconnect selectable per output

Each of the eight outputs can be set for latching or non-latching fire-alarm disconnect, allowing the controller to meet local code requirements without extra hardware. A form-C alarm relay rated at 1 amp 28 VDC signals when the FACP input is triggered. Short-circuit and thermal overload protection safeguard the supply and connected devices.

Puncte forte

  • Fire alarm disconnect selectable per output for flexible safety integration
  • Short circuit and thermal overload protection prevents equipment damage
  • Filtered and electronically regulated outputs deliver clean power
  • Alarm output relay signals FACP trigger with form C contact
  • Lifetime warranty provides long-term reliability assurance

Specificații

TypeOther

Întrebări despre acest articol

Will the ACM Series 8 fused outputs work with my existing 12 VDC access control devices?

Yes, the unit provides 12 VDC regulated outputs rated at 4 amps, so existing 12 VDC locks and readers can connect directly to any of the eight fused outputs.

How can I verify the fire alarm disconnect is functioning after installation?

Trigger the FACP input; the form C alarm relay will change state and the selected outputs will drop power, confirming the latching or non-latching disconnect is active.

Does the package include the backup batteries or must they be purchased separately?

The supply description lists only the power supply/charger unit; backup batteries are not included and must be sourced separately.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.