Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare

DELL

DELL ST600MM0088 600GB SAS 2.5" 10000RPM 058CWC internal hard drive

SKU CH-6CM4-5MXWS MPN ST600MM0088

A 600 GB 2.5-inch SAS hard drive spinning at 10,000 RPM with a 12 Gbps interface

  • 12Gbps SAS interface enables fast data transfers
  • 10,000 RPM spindle speed reduces access latency
  • 600GB capacity stores critical datasets
  • 5-inch form factor fits dense server bays
  • New condition ensures full manufacturer specification

600 GB 10K SAS drive

This 2.5 inch SAS hard drive spins at 10000 RPM and provides 600 GB of storage. It connects via a 12 Gbps SAS interface for direct attachment to compatible controllers. The drive is supplied new and carries Dell part numbers ST600MM0088 and 058CWC.

Suits SAS arrays only

It fits servers and storage arrays that accept 2.5 inch SAS drives and can supply the required 12 Gbps link. Systems limited to SATA backplanes or lacking SAS controllers cannot use this drive. Buyers needing higher capacities or different form factors should consider other models.

12 Gbps SAS interface

The single specification that decides fit is the 12 Gbps SAS interface combined with the 2.5 inch form factor. Verify that your backplane and controller support this exact interface before purchase.

Puncte forte

  • 12Gbps SAS interface enables fast data transfers
  • 10,000 RPM spindle speed reduces access latency
  • 600GB capacity stores critical datasets
  • 5-inch form factor fits dense server bays
  • New condition ensures full manufacturer specification

Specificații

Nicio specificație publicată pentru acest articol deocamdată.

Întrebări despre acest articol

What is the expected service life of the 10000RPM spindle bearings in this SAS drive?

The drive operates at 10000RPM with a SAS interface; bearing life depends on workload and environment, so monitor SMART data for early wear indicators.

Which limit appears first during sustained transfers — the 12Gbps SAS link or the mechanical throughput?

The 10000RPM platter speed and 600GB capacity set the sustained mechanical throughput, which typically saturates before the 12Gbps SAS interface becomes the bottleneck.

How much heat and noise does the 2.5" 10000RPM mechanism produce when running continuously?

A 2.5" 10000RPM SAS drive generates noticeable heat and audible seek noise under constant load; ensure adequate airflow in the enclosure to keep temperatures within safe limits.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.