אנחנו מקבלים תשלום בקריפטו — כך שמטבעות הקריפטו שברשותך יכולים לקנות ציוד אמיתי.שלם בקריפטו, קנה איתו ציוד אמיתי. משלוח חינם ומבוטח לכל העולם מעל 399 $. קרטונים ניטרליים וללא מיתוג, נשלחים מגרמניה.משלוח חינם ומבוטח מעל 399 $. השער שלך ננעל ל-30 דקות מרגע פתיחת הקופה.שער נעול ל-30 דקות. כל פריט אטום, המספר הסידורי שלו נבדק, והוא מכוסה באחריות ל-24 חודשים.אטום, באחריות ל-24 חודשים.

רשימת ניטור התחבר

DELL

DELL ST600MM0088 600GB SAS 2.5" 10000RPM 058CWC internal hard drive

SKU CH-6CM4-5MXWS MPN ST600MM0088

A 600 GB 2.5-inch SAS hard drive spinning at 10,000 RPM with a 12 Gbps interface

  • 12Gbps SAS interface enables fast data transfers
  • 10,000 RPM spindle speed reduces access latency
  • 600GB capacity stores critical datasets
  • 5-inch form factor fits dense server bays
  • New condition ensures full manufacturer specification

600 GB 10K SAS drive

This 2.5 inch SAS hard drive spins at 10000 RPM and provides 600 GB of storage. It connects via a 12 Gbps SAS interface for direct attachment to compatible controllers. The drive is supplied new and carries Dell part numbers ST600MM0088 and 058CWC.

Suits SAS arrays only

It fits servers and storage arrays that accept 2.5 inch SAS drives and can supply the required 12 Gbps link. Systems limited to SATA backplanes or lacking SAS controllers cannot use this drive. Buyers needing higher capacities or different form factors should consider other models.

12 Gbps SAS interface

The single specification that decides fit is the 12 Gbps SAS interface combined with the 2.5 inch form factor. Verify that your backplane and controller support this exact interface before purchase.

נקודות עיקריות

  • 12Gbps SAS interface enables fast data transfers
  • 10,000 RPM spindle speed reduces access latency
  • 600GB capacity stores critical datasets
  • 5-inch form factor fits dense server bays
  • New condition ensures full manufacturer specification

מפרט טכני

טרם פורסם מפרט טכני לפריט זה.

שאלות על הפריט הזה

What is the expected service life of the 10000RPM spindle bearings in this SAS drive?

The drive operates at 10000RPM with a SAS interface; bearing life depends on workload and environment, so monitor SMART data for early wear indicators.

Which limit appears first during sustained transfers — the 12Gbps SAS link or the mechanical throughput?

The 10000RPM platter speed and 600GB capacity set the sustained mechanical throughput, which typically saturates before the 12Gbps SAS interface becomes the bottleneck.

How much heat and noise does the 2.5" 10000RPM mechanism produce when running continuously?

A 2.5" 10000RPM SAS drive generates noticeable heat and audible seek noise under constant load; ensure adequate airflow in the enclosure to keep temperatures within safe limits.

גם במדף הזה

לקוחות השוו בין אלה

אותו מדף, אותה קופה — שמונה מטבעות קריפטו ונעילת שער ל-30 דקות.