DELL
DELL ST600MM0088 600GB SAS 2.5" 10000RPM 058CWC internal hard drive
A 600 GB 2.5-inch SAS hard drive spinning at 10,000 RPM with a 12 Gbps interface
- 12Gbps SAS interface enables fast data transfers
- 10,000 RPM spindle speed reduces access latency
- 600GB capacity stores critical datasets
- 5-inch form factor fits dense server bays
- New condition ensures full manufacturer specification
600 GB 10K SAS drive
This 2.5 inch SAS hard drive spins at 10000 RPM and provides 600 GB of storage. It connects via a 12 Gbps SAS interface for direct attachment to compatible controllers. The drive is supplied new and carries Dell part numbers ST600MM0088 and 058CWC.
Suits SAS arrays only
It fits servers and storage arrays that accept 2.5 inch SAS drives and can supply the required 12 Gbps link. Systems limited to SATA backplanes or lacking SAS controllers cannot use this drive. Buyers needing higher capacities or different form factors should consider other models.
12 Gbps SAS interface
The single specification that decides fit is the 12 Gbps SAS interface combined with the 2.5 inch form factor. Verify that your backplane and controller support this exact interface before purchase.
Highlights
- 12Gbps SAS interface enables fast data transfers
- 10,000 RPM spindle speed reduces access latency
- 600GB capacity stores critical datasets
- 5-inch form factor fits dense server bays
- New condition ensures full manufacturer specification
Specifications
No published specifications for this item yet.
Questions about this item
What is the expected service life of the 10000RPM spindle bearings in this SAS drive?
The drive operates at 10000RPM with a SAS interface; bearing life depends on workload and environment, so monitor SMART data for early wear indicators.
Which limit appears first during sustained transfers — the 12Gbps SAS link or the mechanical throughput?
The 10000RPM platter speed and 600GB capacity set the sustained mechanical throughput, which typically saturates before the 12Gbps SAS interface becomes the bottleneck.
How much heat and noise does the 2.5" 10000RPM mechanism produce when running continuously?
A 2.5" 10000RPM SAS drive generates noticeable heat and audible seek noise under constant load; ensure adequate airflow in the enclosure to keep temperatures within safe limits.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
