Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare

Kingston Technology Corp.

Kingston Technology Corp. KVR1333D3N9/2G 2GB DDR3 1333 CL9 memory upgrade

SKU CH-YKN5-7NV0E MPN KVR1333D3N9/2G

2GB DDR3 1333MHz CL9 desktop memory module with 240-pin unbuffered design at 1.5V

  • Capacity2GB
  • Type240-Pin DDR3 SDRAM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.50V
  • ECCNo
  • 2GB capacity adds responsive multitasking headroom
  • DDR3 1333 speed matches legacy system requirements
  • CL9 latency supports stable everyday performance
  • 240-pin DIMM fits standard desktop motherboards
  • 50V operation keeps power draw low

Kingston ValueRAM 2GB DDR3-1333 Desktop Module

This Kingston ValueRAM module provides a 2GB DDR3-1333 memory upgrade for compatible desktop systems. It operates at the standard PC3-10600 speed grade with a CAS latency of CL9 and runs at 1.50V. The unbuffered, non-ECC design uses a 240-pin DIMM form factor with gold contact fingers for reliable installation.

Suitable for legacy desktop repairs

Builders restoring or maintaining older desktop platforms that specifically require DDR3-1333 unbuffered memory will find this module matches the JEDEC standard timing of 9-9-9. Systems needing ECC error correction, registered signal buffering, higher capacities per slot, or a different memory generation cannot use this part.

2GB capacity per module

The single specification that determines fit is the 2GB density; the board and chipset must support this capacity per DIMM slot. The SPD is programmed to JEDEC standard latency DDR3-1333 timing at 1.5V, and the module is built from sixteen 128M x 8-bit FBGA components in a 2Rx8 organisation.

Puncte forte

  • 2GB capacity adds responsive multitasking headroom
  • DDR3 1333 speed matches legacy system requirements
  • CL9 latency supports stable everyday performance
  • 240-pin DIMM fits standard desktop motherboards
  • 50V operation keeps power draw low

Specificații

BrandKingston
SeriesValueRAM
ModelKVR1333D3N9/2G
Capacity2GB
Type240-Pin DDR3 SDRAM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.50V
ECCNo
Buffered/RegisteredUnbuffered
FeaturesThis document describes ValueRAM's 256M x 64-bit (2GB) DDR3-1333 CL9 SDRAM (Synchronous DRAM), 2Rx8 memory module, based on sixteen 128M x 8-bit DDR3-1333 FBGA components. The SPD is programmed to JEDEC standard latency DDR3-1333 timing of 9-9-9 at 1.5V. This 240-pin DIMM uses gold contact fingers.
Greutate la expediere0.02 kg
Dimensiunile coletului159 × 44 × 6 mm

Întrebări despre acest articol

Will this 2GB DDR3 1333 CL9 module run alongside my existing DDR3 1333 memory?

It is a 240-pin DDR3 1333 (PC3 10600) unbuffered DIMM with CL9 timing at 1.50V. If your current memory matches that speed, voltage and latency, the SPD will negotiate the same JEDEC 9-9-9 profile and both sticks should operate together.

How can I confirm the module is running at DDR3 1333 CL9 after installation?

Enter the BIOS or use a tool such as CPU-Z and verify the memory tab shows 1333 MT/s (PC3 10600) with timings 9-9-9 at 1.50V, matching the JEDEC standard programmed into the SPD.

What comes in the box and do I need anything else to install it?

The package contains the single 2GB 240-pin DDR3 DIMM. No cables, brackets or additional components are required; you only need a compatible desktop motherboard with a free DDR3 slot.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.