Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi

Kingston Technology Corp.

Kingston Technology Corp. KVR1333D3N9/2G 2GB DDR3 1333 CL9 memory upgrade

SKU CH-YKN5-7NV0E MPN KVR1333D3N9/2G

2GB DDR3 1333MHz CL9 desktop memory module with 240-pin unbuffered design at 1.5V

  • Capacity2GB
  • Type240-Pin DDR3 SDRAM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.50V
  • ECCNo
  • 2GB capacity adds responsive multitasking headroom
  • DDR3 1333 speed matches legacy system requirements
  • CL9 latency supports stable everyday performance
  • 240-pin DIMM fits standard desktop motherboards
  • 50V operation keeps power draw low

Kingston ValueRAM 2GB DDR3-1333 Desktop Module

This Kingston ValueRAM module provides a 2GB DDR3-1333 memory upgrade for compatible desktop systems. It operates at the standard PC3-10600 speed grade with a CAS latency of CL9 and runs at 1.50V. The unbuffered, non-ECC design uses a 240-pin DIMM form factor with gold contact fingers for reliable installation.

Suitable for legacy desktop repairs

Builders restoring or maintaining older desktop platforms that specifically require DDR3-1333 unbuffered memory will find this module matches the JEDEC standard timing of 9-9-9. Systems needing ECC error correction, registered signal buffering, higher capacities per slot, or a different memory generation cannot use this part.

2GB capacity per module

The single specification that determines fit is the 2GB density; the board and chipset must support this capacity per DIMM slot. The SPD is programmed to JEDEC standard latency DDR3-1333 timing at 1.5V, and the module is built from sixteen 128M x 8-bit FBGA components in a 2Rx8 organisation.

Punti di forza

  • 2GB capacity adds responsive multitasking headroom
  • DDR3 1333 speed matches legacy system requirements
  • CL9 latency supports stable everyday performance
  • 240-pin DIMM fits standard desktop motherboards
  • 50V operation keeps power draw low

Caratteristiche tecniche

BrandKingston
SeriesValueRAM
ModelKVR1333D3N9/2G
Capacity2GB
Type240-Pin DDR3 SDRAM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.50V
ECCNo
Buffered/RegisteredUnbuffered
FeaturesThis document describes ValueRAM's 256M x 64-bit (2GB) DDR3-1333 CL9 SDRAM (Synchronous DRAM), 2Rx8 memory module, based on sixteen 128M x 8-bit DDR3-1333 FBGA components. The SPD is programmed to JEDEC standard latency DDR3-1333 timing of 9-9-9 at 1.5V. This 240-pin DIMM uses gold contact fingers.
Peso di spedizione0.02 kg
Dimensioni del pacco159 × 44 × 6 mm

Domande su questo articolo

Will this 2GB DDR3 1333 CL9 module run alongside my existing DDR3 1333 memory?

It is a 240-pin DDR3 1333 (PC3 10600) unbuffered DIMM with CL9 timing at 1.50V. If your current memory matches that speed, voltage and latency, the SPD will negotiate the same JEDEC 9-9-9 profile and both sticks should operate together.

How can I confirm the module is running at DDR3 1333 CL9 after installation?

Enter the BIOS or use a tool such as CPU-Z and verify the memory tab shows 1333 MT/s (PC3 10600) with timings 9-9-9 at 1.50V, matching the JEDEC standard programmed into the SPD.

What comes in the box and do I need anything else to install it?

The package contains the single 2GB 240-pin DDR3 DIMM. No cables, brackets or additional components are required; you only need a compatible desktop motherboard with a free DDR3 slot.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.