Kingston Technology Corp.
Kingston Technology Corp. KVR1333D3N9/2G 2GB DDR3 1333 CL9 memory upgrade
2GB DDR3 1333MHz CL9 desktop memory module with 240-pin unbuffered design at 1.5V
- Capacity2GB
- Type240-Pin DDR3 SDRAM
- SpeedDDR3 1333 (PC3 10600)
- CAS LatencyCL9
- Voltage1.50V
- ECCNo
- 2GB capacity adds responsive multitasking headroom
- DDR3 1333 speed matches legacy system requirements
- CL9 latency supports stable everyday performance
- 240-pin DIMM fits standard desktop motherboards
- 50V operation keeps power draw low
Kingston ValueRAM 2GB DDR3-1333 Desktop Module
This Kingston ValueRAM module provides a 2GB DDR3-1333 memory upgrade for compatible desktop systems. It operates at the standard PC3-10600 speed grade with a CAS latency of CL9 and runs at 1.50V. The unbuffered, non-ECC design uses a 240-pin DIMM form factor with gold contact fingers for reliable installation.
Suitable for legacy desktop repairs
Builders restoring or maintaining older desktop platforms that specifically require DDR3-1333 unbuffered memory will find this module matches the JEDEC standard timing of 9-9-9. Systems needing ECC error correction, registered signal buffering, higher capacities per slot, or a different memory generation cannot use this part.
2GB capacity per module
The single specification that determines fit is the 2GB density; the board and chipset must support this capacity per DIMM slot. The SPD is programmed to JEDEC standard latency DDR3-1333 timing at 1.5V, and the module is built from sixteen 128M x 8-bit FBGA components in a 2Rx8 organisation.
Najważniejsze cechy
- 2GB capacity adds responsive multitasking headroom
- DDR3 1333 speed matches legacy system requirements
- CL9 latency supports stable everyday performance
- 240-pin DIMM fits standard desktop motherboards
- 50V operation keeps power draw low
Specyfikacja
| Brand | Kingston |
|---|---|
| Series | ValueRAM |
| Model | KVR1333D3N9/2G |
| Capacity | 2GB |
| Type | 240-Pin DDR3 SDRAM |
| Speed | DDR3 1333 (PC3 10600) |
| CAS Latency | CL9 |
| Voltage | 1.50V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Features | This document describes ValueRAM's 256M x 64-bit (2GB) DDR3-1333 CL9 SDRAM (Synchronous DRAM), 2Rx8 memory module, based on sixteen 128M x 8-bit DDR3-1333 FBGA components. The SPD is programmed to JEDEC standard latency DDR3-1333 timing of 9-9-9 at 1.5V. This 240-pin DIMM uses gold contact fingers. |
| Waga przesyłki | 0.02 kg |
| Wymiary opakowania | 159 × 44 × 6 mm |
Pytania dotyczące tego produktu
Will this 2GB DDR3 1333 CL9 module run alongside my existing DDR3 1333 memory?
It is a 240-pin DDR3 1333 (PC3 10600) unbuffered DIMM with CL9 timing at 1.50V. If your current memory matches that speed, voltage and latency, the SPD will negotiate the same JEDEC 9-9-9 profile and both sticks should operate together.
How can I confirm the module is running at DDR3 1333 CL9 after installation?
Enter the BIOS or use a tool such as CPU-Z and verify the memory tab shows 1333 MT/s (PC3 10600) with timings 9-9-9 at 1.50V, matching the JEDEC standard programmed into the SPD.
What comes in the box and do I need anything else to install it?
The package contains the single 2GB 240-pin DDR3 DIMM. No cables, brackets or additional components are required; you only need a compatible desktop motherboard with a free DDR3 slot.
Także w tym dziale
Klienci porównywali też te produkty
Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.
Mushkin Enhanced
Mushkin Enhanced 4GB DDR2-800 CL6 SoDIMM Apple 971741A memory upgrade
104,99 USD
0.00134665BTC
Dostępny
SK hynix
SK hynix HYMD232M646C6-J 256MB DDR 333MHz PC2700 CL2.5 SODIMM laptop RAM
- 4GB (2 x 2GB)
7,99 USD
0.00010248BTC
Dostępny