Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Green open-frame PCB power supply, 4 by 2 inches, triple output connectors

myVolts

myVolts RPT-60A 60 W Triple Output Medical Power Supply

SKU CH-T9ZG-WZASZ

A 60 W medical-grade open-frame supply delivering triple outputs with 2×MOPP safety approval and extremely low leakage current

  • TypeAT
  • Medical-grade safety with 2 x MOPP certification
  • Compact 4"×2" PCB footprint saves space in equipment
  • Triple-output rails: 5 V 4.4 A, 12 V 2.2 A, 15 V 0.65 A
  • Low leakage current under 150 µA for patient-connected devices
  • Wide 90–264 Vac input suits global installations

Medical-grade power for critical devices

The myVolts RPT-60A delivers 60 W across three regulated rails, providing 5 V at 4.4 A, 12 V at 2.2 A and either -5 V, -12 V or -15 V at 0.55 A. It is built for equipment such as oral irrigators, hemodialysis machines, medical monitors and sleep-apnea devices that require 2 x MOPP isolation.

Steady output under continuous load

Cooling relies on free-air convection with no moving parts, so output remains stable during prolonged operation in enclosed medical cabinets. Protections against short circuit, overload, over-voltage and over-temperature engage automatically, while leakage current stays below 150 µA to meet BF-application requirements.

Open-frame PCB with Class B EMI

The 4" × 2" board fits tight chassis spaces and carries dual-fuse input for 90–264 VAC mains worldwide. Mounting holes accept standard standoffs for secure installation, and screw terminals simplify wiring without special tools. Compliance covers ANSI/AAMI ES60601-1, IEC/EN60601-1 and EMC standard EN55011.

Puncte forte

  • Medical-grade safety with 2 x MOPP certification
  • Compact 4"×2" PCB footprint saves space in equipment
  • Triple-output rails: 5 V 4.4 A, 12 V 2.2 A, 15 V 0.65 A
  • Low leakage current under 150 µA for patient-connected devices
  • Wide 90–264 Vac input suits global installations

Specificații

TypeAT

Întrebări despre acest articol

How much heat and noise does the 60 W triple-output unit produce when running continuously?

It uses free-air convection cooling with no fan, so it runs silently and generates only the heat normal for a 60 W supply.

What mains wiring and mounting hardware must I already have to install this open-frame PCB supply?

You need a 90–264 V AC input connection, a chassis or bracket for the 4"×2" board, and cables for the three output rails.

Will the 5 V, 12 V and –12 V rails work reliably with legacy ISA or AT-era expansion cards?

The 5 V/4.4 A, 12 V/2.2 A and –12 V/0.55 A outputs match classic AT voltages, and the 2×MOPP insulation meets medical-grade isolation requirements.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.