نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Green open-frame PCB power supply, 4 by 2 inches, triple output connectors

myVolts

myVolts RPT-60A 60 W Triple Output Medical Power Supply

SKU CH-T9ZG-WZASZ

A 60 W medical-grade open-frame supply delivering triple outputs with 2×MOPP safety approval and extremely low leakage current

  • TypeAT
  • Medical-grade safety with 2 x MOPP certification
  • Compact 4"×2" PCB footprint saves space in equipment
  • Triple-output rails: 5 V 4.4 A, 12 V 2.2 A, 15 V 0.65 A
  • Low leakage current under 150 µA for patient-connected devices
  • Wide 90–264 Vac input suits global installations

Medical-grade power for critical devices

The myVolts RPT-60A delivers 60 W across three regulated rails, providing 5 V at 4.4 A, 12 V at 2.2 A and either -5 V, -12 V or -15 V at 0.55 A. It is built for equipment such as oral irrigators, hemodialysis machines, medical monitors and sleep-apnea devices that require 2 x MOPP isolation.

Steady output under continuous load

Cooling relies on free-air convection with no moving parts, so output remains stable during prolonged operation in enclosed medical cabinets. Protections against short circuit, overload, over-voltage and over-temperature engage automatically, while leakage current stays below 150 µA to meet BF-application requirements.

Open-frame PCB with Class B EMI

The 4" × 2" board fits tight chassis spaces and carries dual-fuse input for 90–264 VAC mains worldwide. Mounting holes accept standard standoffs for secure installation, and screw terminals simplify wiring without special tools. Compliance covers ANSI/AAMI ES60601-1, IEC/EN60601-1 and EMC standard EN55011.

أبرز المميزات

  • Medical-grade safety with 2 x MOPP certification
  • Compact 4"×2" PCB footprint saves space in equipment
  • Triple-output rails: 5 V 4.4 A, 12 V 2.2 A, 15 V 0.65 A
  • Low leakage current under 150 µA for patient-connected devices
  • Wide 90–264 Vac input suits global installations

المواصفات

TypeAT

أسئلة حول هذا المنتج

How much heat and noise does the 60 W triple-output unit produce when running continuously?

It uses free-air convection cooling with no fan, so it runs silently and generates only the heat normal for a 60 W supply.

What mains wiring and mounting hardware must I already have to install this open-frame PCB supply?

You need a 90–264 V AC input connection, a chassis or bracket for the 4"×2" board, and cables for the three output rails.

Will the 5 V, 12 V and –12 V rails work reliably with legacy ISA or AT-era expansion cards?

The 5 V/4.4 A, 12 V/2.2 A and –12 V/0.55 A outputs match classic AT voltages, and the 2×MOPP insulation meets medical-grade isolation requirements.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.