Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Green bare circuit board with black memory chips and gold edge connector

NEMIX RAM

NEMIX RAM 16GB DDR5 5600MHz CL46 1Rx8 1.1V ECC UDIMM memory upgrade

SKU CH-CB59-QRDYP

16 GB DDR5 ECC UDIMM at 5600 MHz, CL46, 1.1 V, 288-pin, verified for Supermicro X13SAW-F

  • Capacity16GB
  • Type288-Pin DDR5 ECC UDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 16GB

  • Error-correcting code protects data integrity on the fly
  • 5600 MT/s DDR5 speed matches the board's rated specification
  • 1 V operation keeps power draw low
  • 288-pin unbuffered UDIMM fits the required slot type
  • 1Rx8 single-rank layout meets the controller's timing expectations

Exact-Match 16 GB DDR5-5600 ECC UDIMM

This 16 GB DDR5 module runs at 5600 MHz with CL46 latency and 1.1 V. It uses a 1Rx8 unbuffered ECC design on a 288-pin UDIMM form factor. The part is built for the Supermicro X13SAW-F motherboard where the memory controller expects this precise rank, voltage and timing.

Suited for ECC-critical Supermicro X13SAW-F builds

The module fits administrators who need error-correcting memory on that specific board and cannot use registered or SO-DIMM alternatives. It is not for systems that require RDIMMs, non-ECC memory, higher capacities per slot or a different DDR generation.

DDR5 5600 CL46 1.1 V 1Rx8 ECC UDIMM

The single specification that decides fit is the exact DDR5-5600 CL46 1.1 V 1Rx8 unbuffered ECC UDIMM profile. Your motherboard manual must confirm this speed, rank, voltage and ECC type before purchase.

Puncte forte

  • Error-correcting code protects data integrity on the fly
  • 5600 MT/s DDR5 speed matches the board's rated specification
  • 1 V operation keeps power draw low
  • 288-pin unbuffered UDIMM fits the required slot type
  • 1Rx8 single-rank layout meets the controller's timing expectations

Specificații

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 ECC Unbuffered UDIMM Memory
Part NumberME44800-618K1
Capacity16GB
Type288-Pin DDR5 ECC UDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC Unbuffered UDIMM Motherboard Compatible
Package Content16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN ECC UDIMM KIT

Alte versiuni ale acestui model

5 în plus din aceeași gamă

Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.

Întrebări despre acest articol

What does the 5600 MHz speed mean when the module is installed in a Supermicro X13SAW-F motherboard?

The module runs at DDR5 5600 with CL46 timing and 1.1 V, delivering the rated data rate the board's memory controller expects for full capacity recognition.

What does the PC5-44800 designation tell me about the DDR5 interface on this UDIMM?

PC5-44800 is the JEDEC standard name for DDR5 5600, confirming the module meets the official speed, voltage and timing specification for unbuffered ECC UDIMMs.

What physical slot and clearance does this 288-pin UDIMM need to fit the X13SAW-F?

It requires a standard 288-pin DDR5 UDIMM slot; the module has no heat spreader, so it fits in tight layouts where taller DIMMs would interfere with coolers or chassis walls.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.