Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Four green DDR5 RDIMM modules without heat spreaders in a kit box

NEMIX RAM

NEMIX RAM 192GB 4x48GB DDR5 5600 CL46 ECC RDIMM memory upgrade

SKU CH-JKRJ-8ST6V

192 GB DDR5-5600 ECC registered RDIMM kit with four 48 GB modules at CL46 and 1.1 V for GIGABYTE MS34-CP0 servers

  • Capacity192GB (4 x 48GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 192GB 4X48GB

Vedeți celelalte 18 configurații
  • 192 GB total capacity with four 48 GB modules for maximum server density
  • DDR5 5600 speed rated at PC5-44800 for high-throughput workloads
  • Registered ECC design with 2Rx8 organisation corrects single-bit errors and offloads the memory controller
  • CL46 latency at 1.1 V delivers specified timing without extra voltage
  • 288-pin RDIMM form factor matches the GIGABYTE MS34-CP0 motherboard slot and population rules

Server DDR5 RDIMM kit

This NEMIX RAM kit supplies 192GB across four 48GB DDR5-5600 registered ECC modules built to the PC5-44800 standard with CL46 timings and 1.1V operation. The 2Rx8 organisation and 288-pin RDIMM form factor match the memory controller requirements of the GIGABYTE MS34-CP0 motherboard so the full capacity is recognised at rated speed. Major-brand Samsung, Micron or Hynix ICs are used throughout the kit.

Ideal for populated server builds

The registered buffer and on-die ECC let every slot run fully populated without overloading the memory controller while correcting single-bit errors before they reach production workloads. Builders who need unbuffered UDIMM or SODIMM modules cannot use this kit because the motherboard only accepts registered RDIMMs. Buyers without access to their system manual for approved population order should verify that first.

DDR5-5600 RDIMM specification

The single spec that decides fitment is the DDR5-5600 registered RDIMM standard with 2Rx8 rank, 1.1V voltage and CL46 latency in a 288-pin package. If the board calls for a different speed, voltage, rank or form factor the modules will not be recognised at full capacity.

Puncte forte

  • 192 GB total capacity with four 48 GB modules for maximum server density
  • DDR5 5600 speed rated at PC5-44800 for high-throughput workloads
  • Registered ECC design with 2Rx8 organisation corrects single-bit errors and offloads the memory controller
  • CL46 latency at 1.1 V delivers specified timing without extra voltage
  • 288-pin RDIMM form factor matches the GIGABYTE MS34-CP0 motherboard slot and population rules

Specificații

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-4828K4
Capacity192GB (4 x 48GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemGIGABYTE
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content192GB 4X48GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Alte versiuni ale acestui model

5 în plus din aceeași gamă

Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.

Întrebări despre acest articol

What motherboard slot type does the 288-pin DDR5 RDIMM require?

The modules fit 288-pin DDR5 RDIMM slots on the GIGABYTE MS34-CP0 motherboard; they are not compatible with UDIMM or SODIMM sockets.

In which order should the four 48 GB modules be populated for the GIGABYTE MS34-CP0?

Follow the motherboard manual's approved DIMM population sequence; the kit is spec-matched to that board's memory-population rules.

Will the registered ECC design reduce the need for future firmware updates?

Registered architecture and on-the-fly ECC correction maintain stability at full 192 GB capacity, but firmware updates depend on the platform vendor.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.