暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Four green DDR5 RDIMM modules without heat spreaders in a kit box

NEMIX RAM

NEMIX RAM 192GB 4x48GB DDR5 5600 CL46 ECC RDIMM memory upgrade

SKU CH-JKRJ-8ST6V

192 GB DDR5-5600 ECC registered RDIMM kit with four 48 GB modules at CL46 and 1.1 V for GIGABYTE MS34-CP0 servers

  • Capacity192GB (4 x 48GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 192GB 4X48GB

他に 18点の構成を表示
  • 192 GB total capacity with four 48 GB modules for maximum server density
  • DDR5 5600 speed rated at PC5-44800 for high-throughput workloads
  • Registered ECC design with 2Rx8 organisation corrects single-bit errors and offloads the memory controller
  • CL46 latency at 1.1 V delivers specified timing without extra voltage
  • 288-pin RDIMM form factor matches the GIGABYTE MS34-CP0 motherboard slot and population rules

Server DDR5 RDIMM kit

This NEMIX RAM kit supplies 192GB across four 48GB DDR5-5600 registered ECC modules built to the PC5-44800 standard with CL46 timings and 1.1V operation. The 2Rx8 organisation and 288-pin RDIMM form factor match the memory controller requirements of the GIGABYTE MS34-CP0 motherboard so the full capacity is recognised at rated speed. Major-brand Samsung, Micron or Hynix ICs are used throughout the kit.

Ideal for populated server builds

The registered buffer and on-die ECC let every slot run fully populated without overloading the memory controller while correcting single-bit errors before they reach production workloads. Builders who need unbuffered UDIMM or SODIMM modules cannot use this kit because the motherboard only accepts registered RDIMMs. Buyers without access to their system manual for approved population order should verify that first.

DDR5-5600 RDIMM specification

The single spec that decides fitment is the DDR5-5600 registered RDIMM standard with 2Rx8 rank, 1.1V voltage and CL46 latency in a 288-pin package. If the board calls for a different speed, voltage, rank or form factor the modules will not be recognised at full capacity.

特長

  • 192 GB total capacity with four 48 GB modules for maximum server density
  • DDR5 5600 speed rated at PC5-44800 for high-throughput workloads
  • Registered ECC design with 2Rx8 organisation corrects single-bit errors and offloads the memory controller
  • CL46 latency at 1.1 V delivers specified timing without extra voltage
  • 288-pin RDIMM form factor matches the GIGABYTE MS34-CP0 motherboard slot and population rules

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-4828K4
Capacity192GB (4 x 48GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemGIGABYTE
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content192GB 4X48GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

What motherboard slot type does the 288-pin DDR5 RDIMM require?

The modules fit 288-pin DDR5 RDIMM slots on the GIGABYTE MS34-CP0 motherboard; they are not compatible with UDIMM or SODIMM sockets.

In which order should the four 48 GB modules be populated for the GIGABYTE MS34-CP0?

Follow the motherboard manual's approved DIMM population sequence; the kit is spec-matched to that board's memory-population rules.

Will the registered ECC design reduce the need for future firmware updates?

Registered architecture and on-the-fly ECC correction maintain stability at full 192 GB capacity, but firmware updates depend on the platform vendor.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。