BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 USD
0.00279164BTC
În stoc
NEMIX RAM
NEMIX RAM 4GB DDR3 1333 PC3-10600 1.35V 204-Pin SODIMM POSIFLEX HS-3510W memory upgrade
A 4 GB DDR3 SODIMM running at 1333 MHz and 1.35 V for the POSIFLEX HS-3510W terminal
- Capacity4GB
- SpeedDDR3 1333 (PC3 10600)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.50V
- Designed for POSIFLEX HS-3510W terminal
- 4GB DDR3 1333MHz PC3-10600 speed
- Low-voltage 1.35V DDR3 SODIMM module
- 2Rx8 dual-rank unbuffered architecture
- 204-pin form factor fits compatible systems
System-specific DDR3 SODIMM for POS terminal
This 4 GB DDR3 1333 module is built for the POSIFLEX HS-3510W all-in-one terminal. It fits the 204-pin SODIMM slot and matches the system's PC3-10600 timing at CAS latency 9. The 2Rx8 rank layout matches the OEM specification for stable operation in point-of-sale workloads.
Low-voltage unbuffered operation
The module runs at 1.35 V while remaining compatible with 1.50 V system rails, reducing power draw and heat inside the compact chassis. Non-ECC unbuffered design keeps latency low for transaction processing. No heat spreader is fitted, relying on the terminal's internal airflow for cooling.
Single-module upgrade kit
The package contains one 4 GB SODIMM; no cables, tools or software are included. Installation is a straightforward slot insertion following the terminal's service manual. The memory is stress-tested before shipping to ensure compatibility with the POSIFLEX platform.
Puncte forte
- Designed for POSIFLEX HS-3510W terminal
- 4GB DDR3 1333MHz PC3-10600 speed
- Low-voltage 1.35V DDR3 SODIMM module
- 2Rx8 dual-rank unbuffered architecture
- 204-pin form factor fits compatible systems
Specificații
| Brand | NEMIX RAM |
|---|---|
| Series | POSIFLEX POS Series Point of Sale Kiosk Memory |
| Model | POSIFLEX POS DDR3 1333MHZ Non-ECC Unbuffered SODIMM |
| Part Number | MS10600-428K1 |
| Capacity | 4GB |
| Speed | DDR3 1333 (PC3 10600) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.50V |
| Compatible System | POSIFLEX POS |
| CAS Latency | CL9 |
| Heat Spreader | No |
| Type | 204-Pin DDR3 SODIMM |
| Rank | 2Rx8 |
| Features | DDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 4GB (1X4GB) DDR3 1333MHZ PC3-10600 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM |
Întrebări despre acest articol
How do I install the 204-pin SODIMM into the POSIFLEX HS-3510W and what step is often missed?
Power off the terminal and disconnect the AC adapter. Remove the memory cover on the underside, align the notch on the module with the slot key, insert at an angle and press down until both side clips click. The step often missed is fully seating the module so both clips engage; a partially seated stick will cause a no-post condition.
What maintenance or replacement will this 4GB DDR3 module need over time?
The module has no heat spreader and uses unbuffered DDR3 chips from major OEMs. No scheduled maintenance is required. If errors appear, run a memory diagnostic; replacement is only needed if the module fails testing or the terminal's workload exceeds the 4GB capacity.
What limit appears first when the POS terminal runs sustained workloads on this memory?
The 4GB capacity is the first bottleneck under sustained multi-tasking or large print queues, causing the OS to swap to storage. The CL9 latency and 1333 MT/s speed are fixed by the DDR3 specification and the platform's memory controller, so they do not degrade further.
Tot din acest raion
Clienții au comparat și acestea.
Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.
