نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Green 204-pin DDR3 SODIMM module with black chips, no heat spreader

NEMIX RAM

NEMIX RAM 4GB DDR3 1333 PC3-10600 1.35V 204-Pin SODIMM POSIFLEX HS-3510W memory upgrade

SKU CH-ECZ7-VXVRA

A 4 GB DDR3 SODIMM running at 1333 MHz and 1.35 V for the POSIFLEX HS-3510W terminal

  • Capacity4GB
  • SpeedDDR3 1333 (PC3 10600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.50V
  • Designed for POSIFLEX HS-3510W terminal
  • 4GB DDR3 1333MHz PC3-10600 speed
  • Low-voltage 1.35V DDR3 SODIMM module
  • 2Rx8 dual-rank unbuffered architecture
  • 204-pin form factor fits compatible systems

System-specific DDR3 SODIMM for POS terminal

This 4 GB DDR3 1333 module is built for the POSIFLEX HS-3510W all-in-one terminal. It fits the 204-pin SODIMM slot and matches the system's PC3-10600 timing at CAS latency 9. The 2Rx8 rank layout matches the OEM specification for stable operation in point-of-sale workloads.

Low-voltage unbuffered operation

The module runs at 1.35 V while remaining compatible with 1.50 V system rails, reducing power draw and heat inside the compact chassis. Non-ECC unbuffered design keeps latency low for transaction processing. No heat spreader is fitted, relying on the terminal's internal airflow for cooling.

Single-module upgrade kit

The package contains one 4 GB SODIMM; no cables, tools or software are included. Installation is a straightforward slot insertion following the terminal's service manual. The memory is stress-tested before shipping to ensure compatibility with the POSIFLEX platform.

أبرز المميزات

  • Designed for POSIFLEX HS-3510W terminal
  • 4GB DDR3 1333MHz PC3-10600 speed
  • Low-voltage 1.35V DDR3 SODIMM module
  • 2Rx8 dual-rank unbuffered architecture
  • 204-pin form factor fits compatible systems

المواصفات

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR3 1333MHZ Non-ECC Unbuffered SODIMM
Part NumberMS10600-428K1
Capacity4GB
SpeedDDR3 1333 (PC3 10600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.50V
Compatible SystemPOSIFLEX POS
CAS LatencyCL9
Heat SpreaderNo
Type204-Pin DDR3 SODIMM
Rank2Rx8
FeaturesDDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content4GB (1X4GB) DDR3 1333MHZ PC3-10600 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM

أسئلة حول هذا المنتج

How do I install the 204-pin SODIMM into the POSIFLEX HS-3510W and what step is often missed?

Power off the terminal and disconnect the AC adapter. Remove the memory cover on the underside, align the notch on the module with the slot key, insert at an angle and press down until both side clips click. The step often missed is fully seating the module so both clips engage; a partially seated stick will cause a no-post condition.

What maintenance or replacement will this 4GB DDR3 module need over time?

The module has no heat spreader and uses unbuffered DDR3 chips from major OEMs. No scheduled maintenance is required. If errors appear, run a memory diagnostic; replacement is only needed if the module fails testing or the terminal's workload exceeds the 4GB capacity.

What limit appears first when the POS terminal runs sustained workloads on this memory?

The 4GB capacity is the first bottleneck under sustained multi-tasking or large print queues, causing the OS to swap to storage. The CL9 latency and 1333 MT/s speed are fixed by the DDR3 specification and the platform's memory controller, so they do not degrade further.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.