BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.
NEMIX RAM
A 4 GB DDR3 SODIMM running at 1333 MHz and 1.35 V for the POSIFLEX HS-3510W terminal
This 4 GB DDR3 1333 module is built for the POSIFLEX HS-3510W all-in-one terminal. It fits the 204-pin SODIMM slot and matches the system's PC3-10600 timing at CAS latency 9. The 2Rx8 rank layout matches the OEM specification for stable operation in point-of-sale workloads.
The module runs at 1.35 V while remaining compatible with 1.50 V system rails, reducing power draw and heat inside the compact chassis. Non-ECC unbuffered design keeps latency low for transaction processing. No heat spreader is fitted, relying on the terminal's internal airflow for cooling.
The package contains one 4 GB SODIMM; no cables, tools or software are included. Installation is a straightforward slot insertion following the terminal's service manual. The memory is stress-tested before shipping to ensure compatibility with the POSIFLEX platform.
| Brand | NEMIX RAM |
|---|---|
| Series | POSIFLEX POS Series Point of Sale Kiosk Memory |
| Model | POSIFLEX POS DDR3 1333MHZ Non-ECC Unbuffered SODIMM |
| Part Number | MS10600-428K1 |
| Capacity | 4GB |
| Speed | DDR3 1333 (PC3 10600) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.50V |
| Compatible System | POSIFLEX POS |
| CAS Latency | CL9 |
| Heat Spreader | No |
| Type | 204-Pin DDR3 SODIMM |
| Rank | 2Rx8 |
| Features | DDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 4GB (1X4GB) DDR3 1333MHZ PC3-10600 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM |
Power off the terminal and disconnect the AC adapter. Remove the memory cover on the underside, align the notch on the module with the slot key, insert at an angle and press down until both side clips click. The step often missed is fully seating the module so both clips engage; a partially seated stick will cause a no-post condition.
The module has no heat spreader and uses unbuffered DDR3 chips from major OEMs. No scheduled maintenance is required. If errors appear, run a memory diagnostic; replacement is only needed if the module fails testing or the terminal's workload exceeds the 4GB capacity.
The 4GB capacity is the first bottleneck under sustained multi-tasking or large print queues, causing the OS to swap to storage. The CL9 latency and 1333 MT/s speed are fixed by the DDR3 specification and the platform's memory controller, so they do not degrade further.
Anche in questo reparto
Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.
Cosa invia per pagare, e in quale valuta legge i prezzi.
Inviato dal Suo portafoglio alla cassa
Solo a titolo indicativo — il catalogo è espresso in dollari
Nessuna valuta corrisponde.
Scelga la lingua in cui il sito Le parla.
Nessuna lingua corrisponde.
Prima visita?
Ne ha già uno?
Non esiste un ripristino automatico: questo negozio non invia e-mail, quindi non esiste alcun link monouso da richiedere. Lasci l’indirizzo sull’account: verrà gestito manualmente.
Richiesta registrata
Non arriverà nulla nella Sua casella di posta — questo negozio non invia e-mail. Qualcuno se ne occupa manualmente.
L’ha ritrovata?