Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Green circuit board with black memory chips and gold edge connectors

NEMIX RAM

NEMIX RAM 4GB DDR3 1600 1.35V 204-Pin SODIMM SuperMicro Compatible memory upgrade

SKU CH-K8NB-XVXZ3

A 4 GB DDR3 SODIMM running at 1600 MHz with 1.35 V low voltage for SuperMicro systems

  • Capacity4GB
  • SpeedDDR3 1600 (PC3 12800)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.35V
  • 4 GB capacity expands system memory for multitasking
  • DDR3 1600 speed transfers data at PC3-12800 rates
  • 35 V operation reduces power draw and heat
  • 204-pin SODIMM fits Supermicro MEM-DR340L-CL01-SO16 slots
  • Major OEM chips from Samsung Micron Hynix ensure reliability

System-Specific DDR3 SODIMM for Supermicro

This 4 GB DDR3 1600 module uses a 204-pin SODIMM form factor and operates at 1.35 V. It is built as a non-ECC unbuffered stick with a single-rank 1Rx8 organisation. The part is validated for Supermicro systems that reference the MEM-DR340L-CL01-SO16 part number.

DDR3 1600 interface practical limits

The DDR3 1600 (PC3-12800) standard tops out at 1600 MT/s with a CAS latency of CL11 on this module. Voltage is fixed at 1.35 V, so the stick cannot run at the higher 1.5 V used by some older DDR3 platforms. Maximum capacity per slot is defined by the 4 GB density of this specific module.

Compatibility checks before ordering

Verify that your Supermicro motherboard or server accepts DDR3 SODIMM modules and supports 1.35 V non-ECC unbuffered memory. Confirm the system does not require registered or ECC sticks, as this module provides neither. Check the number of available SODIMM slots to match your desired total capacity.

Puncte forte

  • 4 GB capacity expands system memory for multitasking
  • DDR3 1600 speed transfers data at PC3-12800 rates
  • 35 V operation reduces power draw and heat
  • 204-pin SODIMM fits Supermicro MEM-DR340L-CL01-SO16 slots
  • Major OEM chips from Samsung Micron Hynix ensure reliability

Specificații

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSupermicro DDR3 1600MHZ Non-ECC Unbuffered SODIMM
Part NumberMS12800-418K1
Capacity4GB
SpeedDDR3 1600 (PC3 12800)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.35V
Compatible SystemSupermicro
CAS LatencyCL11
Heat SpreaderNo
Type204-Pin DDR3 SODIMM
Rank1Rx8
FeaturesDDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content4GB (1X4GB) DDR3 1600MHZ PC3-12800 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM

Întrebări despre acest articol

Should I pick the 4 GB module or look for a larger capacity?

This part is a single 4 GB DDR3 1600 SODIMM. Choose it when your Supermicro system needs exactly 4 GB or when you are filling one slot at a time.

What does the 1600 MHz speed rating deliver in my Supermicro server?

The module runs at DDR3 1600 (PC3-12800) with CL11 latency, giving the rated bandwidth your platform expects for that speed grade.

How does the 204-pin DDR3 SODIMM interface limit what I can install?

The 204-pin DDR3 SODIMM form factor only fits DDR3 SO-DIMM slots, so it cannot be used with DDR5 platforms.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.