SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
$391.99
0.00504479BTC
In stock
NEMIX RAM
NEMIX RAM 4GB DDR3 1600 1.35V 204-Pin SODIMM SuperMicro Compatible memory upgrade
A 4 GB DDR3 SODIMM running at 1600 MHz with 1.35 V low voltage for SuperMicro systems
- Capacity4GB
- SpeedDDR3 1600 (PC3 12800)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.35V
- 4 GB capacity expands system memory for multitasking
- DDR3 1600 speed transfers data at PC3-12800 rates
- 35 V operation reduces power draw and heat
- 204-pin SODIMM fits Supermicro MEM-DR340L-CL01-SO16 slots
- Major OEM chips from Samsung Micron Hynix ensure reliability
System-Specific DDR3 SODIMM for Supermicro
This 4 GB DDR3 1600 module uses a 204-pin SODIMM form factor and operates at 1.35 V. It is built as a non-ECC unbuffered stick with a single-rank 1Rx8 organisation. The part is validated for Supermicro systems that reference the MEM-DR340L-CL01-SO16 part number.
DDR3 1600 interface practical limits
The DDR3 1600 (PC3-12800) standard tops out at 1600 MT/s with a CAS latency of CL11 on this module. Voltage is fixed at 1.35 V, so the stick cannot run at the higher 1.5 V used by some older DDR3 platforms. Maximum capacity per slot is defined by the 4 GB density of this specific module.
Compatibility checks before ordering
Verify that your Supermicro motherboard or server accepts DDR3 SODIMM modules and supports 1.35 V non-ECC unbuffered memory. Confirm the system does not require registered or ECC sticks, as this module provides neither. Check the number of available SODIMM slots to match your desired total capacity.
Highlights
- 4 GB capacity expands system memory for multitasking
- DDR3 1600 speed transfers data at PC3-12800 rates
- 35 V operation reduces power draw and heat
- 204-pin SODIMM fits Supermicro MEM-DR340L-CL01-SO16 slots
- Major OEM chips from Samsung Micron Hynix ensure reliability
Specifications
| Brand | NEMIX RAM |
|---|---|
| Series | SuperMicro Server/Workstation Compatible Series Memory |
| Model | Supermicro DDR3 1600MHZ Non-ECC Unbuffered SODIMM |
| Part Number | MS12800-418K1 |
| Capacity | 4GB |
| Speed | DDR3 1600 (PC3 12800) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.35V |
| Compatible System | Supermicro |
| CAS Latency | CL11 |
| Heat Spreader | No |
| Type | 204-Pin DDR3 SODIMM |
| Rank | 1Rx8 |
| Features | DDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 4GB (1X4GB) DDR3 1600MHZ PC3-12800 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM |
Questions about this item
Should I pick the 4 GB module or look for a larger capacity?
This part is a single 4 GB DDR3 1600 SODIMM. Choose it when your Supermicro system needs exactly 4 GB or when you are filling one slot at a time.
What does the 1600 MHz speed rating deliver in my Supermicro server?
The module runs at DDR3 1600 (PC3-12800) with CL11 latency, giving the rated bandwidth your platform expects for that speed grade.
How does the 204-pin DDR3 SODIMM interface limit what I can install?
The 204-pin DDR3 SODIMM form factor only fits DDR3 SO-DIMM slots, so it cannot be used with DDR5 platforms.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
