Akceptujemy kryptowaluty — posiadane środki można więc wykorzystać na zakup prawdziwego sprzętu.Płatność kryptowalutą — realny sprzęt w zamian. Bezpłatna, ubezpieczona dostawa na całym świecie powyżej 399 $. Neutralne kartony, bez oznaczeń, wysyłane z Niemiec.Bezpłatna, ubezpieczona dostawa powyżej 399 $. Kurs zostaje zablokowany na 30 minut od otwarcia kasy.Kurs zablokowany na 30 minut. Każdy produkt jest fabrycznie zapieczętowany, jego numer seryjny jest sprawdzany, a całość objęta jest 24-miesięczną gwarancją.Zapieczętowane fabrycznie, 24 miesiące gwarancji.

Obserwowane produkty Zaloguj się
Green circuit board with black memory chips and gold edge connectors

NEMIX RAM

NEMIX RAM 4GB DDR3 1600 1.35V 204-Pin SODIMM SuperMicro Compatible memory upgrade

SKU CH-K8NB-XVXZ3

A 4 GB DDR3 SODIMM running at 1600 MHz with 1.35 V low voltage for SuperMicro systems

  • Capacity4GB
  • SpeedDDR3 1600 (PC3 12800)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.35V
  • 4 GB capacity expands system memory for multitasking
  • DDR3 1600 speed transfers data at PC3-12800 rates
  • 35 V operation reduces power draw and heat
  • 204-pin SODIMM fits Supermicro MEM-DR340L-CL01-SO16 slots
  • Major OEM chips from Samsung Micron Hynix ensure reliability

System-Specific DDR3 SODIMM for Supermicro

This 4 GB DDR3 1600 module uses a 204-pin SODIMM form factor and operates at 1.35 V. It is built as a non-ECC unbuffered stick with a single-rank 1Rx8 organisation. The part is validated for Supermicro systems that reference the MEM-DR340L-CL01-SO16 part number.

DDR3 1600 interface practical limits

The DDR3 1600 (PC3-12800) standard tops out at 1600 MT/s with a CAS latency of CL11 on this module. Voltage is fixed at 1.35 V, so the stick cannot run at the higher 1.5 V used by some older DDR3 platforms. Maximum capacity per slot is defined by the 4 GB density of this specific module.

Compatibility checks before ordering

Verify that your Supermicro motherboard or server accepts DDR3 SODIMM modules and supports 1.35 V non-ECC unbuffered memory. Confirm the system does not require registered or ECC sticks, as this module provides neither. Check the number of available SODIMM slots to match your desired total capacity.

Najważniejsze cechy

  • 4 GB capacity expands system memory for multitasking
  • DDR3 1600 speed transfers data at PC3-12800 rates
  • 35 V operation reduces power draw and heat
  • 204-pin SODIMM fits Supermicro MEM-DR340L-CL01-SO16 slots
  • Major OEM chips from Samsung Micron Hynix ensure reliability

Specyfikacja

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSupermicro DDR3 1600MHZ Non-ECC Unbuffered SODIMM
Part NumberMS12800-418K1
Capacity4GB
SpeedDDR3 1600 (PC3 12800)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.35V
Compatible SystemSupermicro
CAS LatencyCL11
Heat SpreaderNo
Type204-Pin DDR3 SODIMM
Rank1Rx8
FeaturesDDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content4GB (1X4GB) DDR3 1600MHZ PC3-12800 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM

Pytania dotyczące tego produktu

Should I pick the 4 GB module or look for a larger capacity?

This part is a single 4 GB DDR3 1600 SODIMM. Choose it when your Supermicro system needs exactly 4 GB or when you are filling one slot at a time.

What does the 1600 MHz speed rating deliver in my Supermicro server?

The module runs at DDR3 1600 (PC3-12800) with CL11 latency, giving the rated bandwidth your platform expects for that speed grade.

How does the 204-pin DDR3 SODIMM interface limit what I can install?

The 204-pin DDR3 SODIMM form factor only fits DDR3 SO-DIMM slots, so it cannot be used with DDR5 platforms.

Także w tym dziale

Klienci porównywali też te produkty

Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.