Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Green circuit board with black memory chips and gold edge connectors

NEMIX RAM

NEMIX RAM 8GB DDR4 2933 PC4-23400 CL21 1.2V 288-Pin UDIMM SuperMicro Compatible memory upgrade

SKU CH-A7C1-T07RD

8 GB DDR4-2933 non-ECC UDIMM module at 1.2 V, CL21, validated for Supermicro workstations

  • Capacity8GB
  • SpeedDDR4 2933 (PC4 23400)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 8GB DDR4 2933 boosts multitasking capacity
  • CL21 latency keeps data flowing smoothly
  • 2V operation lowers power draw
  • 288-pin UDIMM fits SuperMicro workstations
  • Major-brand chips ensure reliable performance

SuperMicro Compatible DDR4 UDIMM

This 8 GB DDR4 module is built for SuperMicro desktops, gaming rigs and SuperWorkstation systems. It targets administrators and builders who need a single, validated stick to expand memory in qualified platforms.

8 GB capacity and 2933 MT/s headroom

The stick delivers 8 GB of non-ECC unbuffered memory at DDR4 2933 (PC4-23400) with CL21 latency and 1.20 V operation. It handles typical workstation workloads and mainstream gaming; larger datasets or multi-channel bandwidth demands will exceed the single-module limit.

DDR4 UDIMM interface constraints

The 288-pin UDIMM form factor fits standard DDR4 slots but cannot be used in DDR5, registered or ECC-only motherboards. Systems requiring registered DIMMs, higher densities per slot or error-correcting memory need a different module type.

Puncte forte

  • 8GB DDR4 2933 boosts multitasking capacity
  • CL21 latency keeps data flowing smoothly
  • 2V operation lowers power draw
  • 288-pin UDIMM fits SuperMicro workstations
  • Major-brand chips ensure reliable performance

Specificații

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR4 2933MHZ Non-ECC Unbuffered UDIMM
Part NumberMD23400-818K1
Capacity8GB
SpeedDDR4 2933 (PC4 23400)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemSupermicro
CAS LatencyCL21
Heat SpreaderNo
Type288-Pin DDR4 UDIMM
Rank1Rx8
FeaturesDDR4 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content8GB (1X8GB) DDR4 2933MHZ PC4-23400 1Rx8 1.2V CL21 288-PIN Non-ECC Unbuffered UDIMM

Întrebări despre acest articol

Will this DDR4 2933 CL21 stick run stably alongside slower DDR4 modules I already have in my SuperMicro workstation?

Yes — the module is JEDEC-standard DDR4-2933 at 1.20 V with CL21 timing, so the system will automatically down-clock all sticks to the slowest installed speed and tightest common timings.

How can I confirm the module is recognised at 2933 MT/s and CL21 after I install it?

Check the BIOS memory information screen or run CPU-Z / dmidecode; both will show the configured speed as 2933 MT/s and the active CAS latency as 21.

Does the single 8 GB UDIMM ship alone or with any extra brackets, cables or tools?

Only the 288-pin DDR4 UDIMM itself is included; no heat spreader, brackets, cables or installation tools are supplied.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.