Nous acceptons la cryptomonnaie — les cryptos que vous détenez peuvent ainsi acheter du matériel réel.Payez en crypto, dépensez-la en matériel réel. Livraison assurée offerte partout dans le monde au-delà de 399 $. Cartons neutres, sans marque, expédiés depuis l’Allemagne.Livraison assurée offerte au-delà de 399 $. Votre taux est bloqué pendant 30 minutes dès l’ouverture de la caisse.Taux bloqué 30 minutes. Chaque article est scellé, son numéro de série est vérifié, et il est couvert par une garantie de 24 mois.Scellé, garanti 24 mois.

Articles suivis Se connecter
Green circuit board with black memory chips and gold edge connectors

NEMIX RAM

NEMIX RAM 8GB DDR4 2933 PC4-23400 CL21 1.2V 288-Pin UDIMM SuperMicro Compatible memory upgrade

SKU CH-A7C1-T07RD

8 GB DDR4-2933 non-ECC UDIMM module at 1.2 V, CL21, validated for Supermicro workstations

  • Capacity8GB
  • SpeedDDR4 2933 (PC4 23400)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 8GB DDR4 2933 boosts multitasking capacity
  • CL21 latency keeps data flowing smoothly
  • 2V operation lowers power draw
  • 288-pin UDIMM fits SuperMicro workstations
  • Major-brand chips ensure reliable performance

SuperMicro Compatible DDR4 UDIMM

This 8 GB DDR4 module is built for SuperMicro desktops, gaming rigs and SuperWorkstation systems. It targets administrators and builders who need a single, validated stick to expand memory in qualified platforms.

8 GB capacity and 2933 MT/s headroom

The stick delivers 8 GB of non-ECC unbuffered memory at DDR4 2933 (PC4-23400) with CL21 latency and 1.20 V operation. It handles typical workstation workloads and mainstream gaming; larger datasets or multi-channel bandwidth demands will exceed the single-module limit.

DDR4 UDIMM interface constraints

The 288-pin UDIMM form factor fits standard DDR4 slots but cannot be used in DDR5, registered or ECC-only motherboards. Systems requiring registered DIMMs, higher densities per slot or error-correcting memory need a different module type.

Points forts

  • 8GB DDR4 2933 boosts multitasking capacity
  • CL21 latency keeps data flowing smoothly
  • 2V operation lowers power draw
  • 288-pin UDIMM fits SuperMicro workstations
  • Major-brand chips ensure reliable performance

Caractéristiques

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR4 2933MHZ Non-ECC Unbuffered UDIMM
Part NumberMD23400-818K1
Capacity8GB
SpeedDDR4 2933 (PC4 23400)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemSupermicro
CAS LatencyCL21
Heat SpreaderNo
Type288-Pin DDR4 UDIMM
Rank1Rx8
FeaturesDDR4 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content8GB (1X8GB) DDR4 2933MHZ PC4-23400 1Rx8 1.2V CL21 288-PIN Non-ECC Unbuffered UDIMM

Questions sur cet article

Will this DDR4 2933 CL21 stick run stably alongside slower DDR4 modules I already have in my SuperMicro workstation?

Yes — the module is JEDEC-standard DDR4-2933 at 1.20 V with CL21 timing, so the system will automatically down-clock all sticks to the slowest installed speed and tightest common timings.

How can I confirm the module is recognised at 2933 MT/s and CL21 after I install it?

Check the BIOS memory information screen or run CPU-Z / dmidecode; both will show the configured speed as 2933 MT/s and the active CAS latency as 21.

Does the single 8 GB UDIMM ship alone or with any extra brackets, cables or tools?

Only the 288-pin DDR4 UDIMM itself is included; no heat spreader, brackets, cables or installation tools are supplied.

Également dans ce rayon

Les clients ont aussi comparé

Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.