We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board with black memory chips and gold edge connectors

NEMIX RAM

NEMIX RAM 8GB DDR4 2933 PC4-23400 CL21 1.2V 288-Pin UDIMM SuperMicro Compatible memory upgrade

SKU CH-A7C1-T07RD

8 GB DDR4-2933 non-ECC UDIMM module at 1.2 V, CL21, validated for Supermicro workstations

  • Capacity8GB
  • SpeedDDR4 2933 (PC4 23400)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 8GB DDR4 2933 boosts multitasking capacity
  • CL21 latency keeps data flowing smoothly
  • 2V operation lowers power draw
  • 288-pin UDIMM fits SuperMicro workstations
  • Major-brand chips ensure reliable performance

SuperMicro Compatible DDR4 UDIMM

This 8 GB DDR4 module is built for SuperMicro desktops, gaming rigs and SuperWorkstation systems. It targets administrators and builders who need a single, validated stick to expand memory in qualified platforms.

8 GB capacity and 2933 MT/s headroom

The stick delivers 8 GB of non-ECC unbuffered memory at DDR4 2933 (PC4-23400) with CL21 latency and 1.20 V operation. It handles typical workstation workloads and mainstream gaming; larger datasets or multi-channel bandwidth demands will exceed the single-module limit.

DDR4 UDIMM interface constraints

The 288-pin UDIMM form factor fits standard DDR4 slots but cannot be used in DDR5, registered or ECC-only motherboards. Systems requiring registered DIMMs, higher densities per slot or error-correcting memory need a different module type.

Highlights

  • 8GB DDR4 2933 boosts multitasking capacity
  • CL21 latency keeps data flowing smoothly
  • 2V operation lowers power draw
  • 288-pin UDIMM fits SuperMicro workstations
  • Major-brand chips ensure reliable performance

Specifications

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR4 2933MHZ Non-ECC Unbuffered UDIMM
Part NumberMD23400-818K1
Capacity8GB
SpeedDDR4 2933 (PC4 23400)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemSupermicro
CAS LatencyCL21
Heat SpreaderNo
Type288-Pin DDR4 UDIMM
Rank1Rx8
FeaturesDDR4 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content8GB (1X8GB) DDR4 2933MHZ PC4-23400 1Rx8 1.2V CL21 288-PIN Non-ECC Unbuffered UDIMM

Questions about this item

Will this DDR4 2933 CL21 stick run stably alongside slower DDR4 modules I already have in my SuperMicro workstation?

Yes — the module is JEDEC-standard DDR4-2933 at 1.20 V with CL21 timing, so the system will automatically down-clock all sticks to the slowest installed speed and tightest common timings.

How can I confirm the module is recognised at 2933 MT/s and CL21 after I install it?

Check the BIOS memory information screen or run CPU-Z / dmidecode; both will show the configured speed as 2933 MT/s and the active CAS latency as 21.

Does the single 8 GB UDIMM ship alone or with any extra brackets, cables or tools?

Only the 288-pin DDR4 UDIMM itself is included; no heat spreader, brackets, cables or installation tools are supplied.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.