SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
391,99 USD
0.00497008BTC
În stoc
NEMIX RAM
NEMIX RAM 8GB DDR4 3200 SODIMM POSIFLEX JK-2732 memory upgrade
8GB DDR4 3200 SODIMM upgrade for POSIFLEX JK-2732 kiosks, CL22 1.20V unbuffered non-ECC
- Capacity8GB
- SpeedDDR4 3200 (PC4 25600)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 8GB DDR4 3200 SODIMM boosts POSIFLEX JK-2732 kiosk responsiveness
- CL22 1.20V unbuffered design keeps power draw low
- 2Rx8 260-pin layout fits the Cachet Series slot exactly
- Major OEM Samsung Micron Hynix chips deliver tested stability
- Non-ECC module installs in minutes with no configuration needed
System-specific DDR4 SODIMM for POSIFLEX JK-2732
This 8 GB DDR4 3200 module is built for the POSIFLEX JK-2732 Cachet Series kiosk. It arrives as a single 260-pin unbuffered SODIMM rated at 1.20 V with CL22 latency. The stick uses major OEM chips from Samsung, Micron or Hynix and carries no heat spreader. It is a new, non-ECC upgrade designed for direct replacement in the target terminal.
Suits technicians servicing the JK-2732 platform
The part matches the exact voltage, pin count and form factor required by the kiosk motherboard. It will not fit full-size DIMM slots, nor will it work in systems that demand ECC or registered memory. Buyers who need higher capacity per slot or lower latency timings should look at a different specification. This module addresses the JK-2732 socket only.
2Rx8 rank configuration decides fit
The dual-rank 2Rx8 organisation is the critical parameter the kiosk memory controller expects. A single-rank alternative would change the electrical loading and may prevent the terminal from posting. Verify the service manual calls for 2Rx8 before ordering.
Puncte forte
- 8GB DDR4 3200 SODIMM boosts POSIFLEX JK-2732 kiosk responsiveness
- CL22 1.20V unbuffered design keeps power draw low
- 2Rx8 260-pin layout fits the Cachet Series slot exactly
- Major OEM Samsung Micron Hynix chips deliver tested stability
- Non-ECC module installs in minutes with no configuration needed
Specificații
| Brand | NEMIX RAM |
|---|---|
| Series | POSIFLEX POS Series Point of Sale Kiosk Memory |
| Model | POSIFLEX POS DDR4 3200MHZ Non-ECC Unbuffered SODIMM |
| Part Number | MS25600-828K1 |
| Capacity | 8GB |
| Speed | DDR4 3200 (PC4 25600) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | POSIFLEX POS |
| CAS Latency | CL22 |
| Heat Spreader | No |
| Type | 260-Pin DDR4 SODIMM |
| Rank | 2Rx8 |
| Features | DDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 8GB (1X8GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 260-PIN Non-ECC Unbuffered SODIMM |
Întrebări despre acest articol
Should I pick the single 8 GB DDR4 3200 SODIMM or a dual-channel kit for my POSIFLEX JK-2732?
The module is sold as one 8 GB stick (1X8GB). If the kiosk has two slots, adding a second identical module will enable dual-channel bandwidth.
What does the 3200 MT/s rating actually deliver inside the JK-2732 kiosk?
The memory runs at DDR4 3200 (PC4-25600) with CL22 latency at 1.20 V, giving the maximum throughput the platform's memory controller supports.
Is the 260-pin SODIMM interface the limiting factor for speed or capacity?
The 260-pin DDR4 SODIMM form factor carries the 3200 MT/s signal; the 8 GB capacity is set by the 2Rx8 organisation on this module.
Tot din acest raion
Clienții au comparat și acestea.
Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.
SAMSUNG
SAMSUNG M393A1K43DB2-CWE DDR4-3200 8GB ECC Registered server RAM
74,99 USD
0.00095081BTC
În stoc