We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board SODIMM module with black memory chips and gold edge connectors

NEMIX RAM

NEMIX RAM 8GB DDR4 3200 SODIMM POSIFLEX JK-2732 memory upgrade

SKU CH-P7P5-4JMWT

8GB DDR4 3200 SODIMM upgrade for POSIFLEX JK-2732 kiosks, CL22 1.20V unbuffered non-ECC

  • Capacity8GB
  • SpeedDDR4 3200 (PC4 25600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 8GB DDR4 3200 SODIMM boosts POSIFLEX JK-2732 kiosk responsiveness
  • CL22 1.20V unbuffered design keeps power draw low
  • 2Rx8 260-pin layout fits the Cachet Series slot exactly
  • Major OEM Samsung Micron Hynix chips deliver tested stability
  • Non-ECC module installs in minutes with no configuration needed

System-specific DDR4 SODIMM for POSIFLEX JK-2732

This 8 GB DDR4 3200 module is built for the POSIFLEX JK-2732 Cachet Series kiosk. It arrives as a single 260-pin unbuffered SODIMM rated at 1.20 V with CL22 latency. The stick uses major OEM chips from Samsung, Micron or Hynix and carries no heat spreader. It is a new, non-ECC upgrade designed for direct replacement in the target terminal.

Suits technicians servicing the JK-2732 platform

The part matches the exact voltage, pin count and form factor required by the kiosk motherboard. It will not fit full-size DIMM slots, nor will it work in systems that demand ECC or registered memory. Buyers who need higher capacity per slot or lower latency timings should look at a different specification. This module addresses the JK-2732 socket only.

2Rx8 rank configuration decides fit

The dual-rank 2Rx8 organisation is the critical parameter the kiosk memory controller expects. A single-rank alternative would change the electrical loading and may prevent the terminal from posting. Verify the service manual calls for 2Rx8 before ordering.

Highlights

  • 8GB DDR4 3200 SODIMM boosts POSIFLEX JK-2732 kiosk responsiveness
  • CL22 1.20V unbuffered design keeps power draw low
  • 2Rx8 260-pin layout fits the Cachet Series slot exactly
  • Major OEM Samsung Micron Hynix chips deliver tested stability
  • Non-ECC module installs in minutes with no configuration needed

Specifications

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR4 3200MHZ Non-ECC Unbuffered SODIMM
Part NumberMS25600-828K1
Capacity8GB
SpeedDDR4 3200 (PC4 25600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemPOSIFLEX POS
CAS LatencyCL22
Heat SpreaderNo
Type260-Pin DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content8GB (1X8GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 260-PIN Non-ECC Unbuffered SODIMM

Questions about this item

Should I pick the single 8 GB DDR4 3200 SODIMM or a dual-channel kit for my POSIFLEX JK-2732?

The module is sold as one 8 GB stick (1X8GB). If the kiosk has two slots, adding a second identical module will enable dual-channel bandwidth.

What does the 3200 MT/s rating actually deliver inside the JK-2732 kiosk?

The memory runs at DDR4 3200 (PC4-25600) with CL22 latency at 1.20 V, giving the maximum throughput the platform's memory controller supports.

Is the 260-pin SODIMM interface the limiting factor for speed or capacity?

The 260-pin DDR4 SODIMM form factor carries the 3200 MT/s signal; the 8 GB capacity is set by the 2Rx8 organisation on this module.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.