Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare

NEMIX RAM

NEMIX RAM DDR5 5600 ECC RDIMM 256GB (2×128GB) CL46 2Rx4 1.1V 288-pin Supermicro H14DSH memory upgrade

SKU CH-XDTF-58WF5

A 256 GB DDR5 ECC RDIMM kit with two 128 GB modules running at 5600 MHz, CL46, 1.1 V, 2Rx4 registered design validated for the Supermicro H14DSH motherboard

  • Capacity256GB (2 x 128GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes
  • 256 GB capacity from two 128 GB modules for maximum server density
  • DDR5 5600 speed with CL46 latency for high-throughput workloads
  • Registered ECC architecture offloads the controller and corrects single-bit errors
  • 1 V operation at 2Rx4 rank for stable fully-populated slots
  • Exact-fit 288-pin RDIMM kit validated for Supermicro H14DSH motherboard

Exact-fit DDR5 kit for Supermicro H14DSH

This 256 GB kit contains two 128 GB DDR5-5600 RDIMMs built to the board's registered ECC specification. It targets administrators who need the full memory capacity the H14DSH can recognise at its rated 5600 MT/s speed.

Registered ECC headroom and population limits

Registered architecture lets every slot run fully populated at 256 GB while ECC corrects single-bit errors on the fly. The 2Rx4 organisation and CL46 timing meet the controller's expectations, but the kit cannot exceed the motherboard's maximum supported capacity or population rules.

DDR5-5600 interface ceiling

The PC5-44800 interface tops out at 5600 MT/s, so bandwidth is capped at that data rate. Systems requiring faster DDR5 speeds or unbuffered UDIMM modules cannot use this registered kit.

Puncte forte

  • 256 GB capacity from two 128 GB modules for maximum server density
  • DDR5 5600 speed with CL46 latency for high-throughput workloads
  • Registered ECC architecture offloads the controller and corrects single-bit errors
  • 1 V operation at 2Rx4 rank for stable fully-populated slots
  • Exact-fit 288-pin RDIMM kit validated for Supermicro H14DSH motherboard

Specificații

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-724K2
Capacity256GB (2 x 128GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content256GB 2X128GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Alte versiuni ale acestui model

5 în plus din aceeași gamă

Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.

Întrebări despre acest articol

Will the 2Rx4 1.1V DDR5-5600 RDIMMs run at rated speed alongside existing 1Rx8 DDR5-4800 modules in my Supermicro H14DSH?

The board will clock all installed DIMMs to the lowest common speed and apply the loosest timings across channels; mixing 5600 CL46 2Rx4 sticks with 4800 1Rx8 modules therefore forces the kit down to 4800 MHz.

How can I confirm the 256 GB kit is detected at DDR5-5600 CL46 with ECC active after installation?

Enter the BIOS or UEFI and verify the memory frequency reads 5600 MT/s, CAS latency shows 46, total capacity reports 256 GB, and ECC status is reported as enabled or active.

Does the MR44800-724K2 kit include any heatsinks, cables or installation tools, or must those be sourced separately?

The package contains only the two 128 GB DDR5 5600 2Rx4 1.1 V CL46 288-pin ECC Registered RDIMM modules; no heat spreaders, cables or tools are included.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.