暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Two green DDR5 RDIMM modules in anti-static tray

NEMIX RAM

NEMIX RAM DDR5 5600 ECC RDIMM 256GB (2×128GB) CL46 2Rx4 1.1V 288-pin Supermicro H14DSH memory upgrade

SKU CH-XDTF-58WF5

A 256 GB DDR5 ECC RDIMM kit with two 128 GB modules running at 5600 MHz, CL46, 1.1 V, 2Rx4 registered design validated for the Supermicro H14DSH motherboard

  • Capacity256GB (2 x 128GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 256GB 2X128GB

他に 30点の構成を表示
  • 256 GB capacity from two 128 GB modules for maximum server density
  • DDR5 5600 speed with CL46 latency for high-throughput workloads
  • Registered ECC architecture offloads the controller and corrects single-bit errors
  • 1 V operation at 2Rx4 rank for stable fully-populated slots
  • Exact-fit 288-pin RDIMM kit validated for Supermicro H14DSH motherboard

Exact-fit DDR5 kit for Supermicro H14DSH

This 256 GB kit contains two 128 GB DDR5-5600 RDIMMs built to the board's registered ECC specification. It targets administrators who need the full memory capacity the H14DSH can recognise at its rated 5600 MT/s speed.

Registered ECC headroom and population limits

Registered architecture lets every slot run fully populated at 256 GB while ECC corrects single-bit errors on the fly. The 2Rx4 organisation and CL46 timing meet the controller's expectations, but the kit cannot exceed the motherboard's maximum supported capacity or population rules.

DDR5-5600 interface ceiling

The PC5-44800 interface tops out at 5600 MT/s, so bandwidth is capped at that data rate. Systems requiring faster DDR5 speeds or unbuffered UDIMM modules cannot use this registered kit.

特長

  • 256 GB capacity from two 128 GB modules for maximum server density
  • DDR5 5600 speed with CL46 latency for high-throughput workloads
  • Registered ECC architecture offloads the controller and corrects single-bit errors
  • 1 V operation at 2Rx4 rank for stable fully-populated slots
  • Exact-fit 288-pin RDIMM kit validated for Supermicro H14DSH motherboard

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-724K2
Capacity256GB (2 x 128GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content256GB 2X128GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Will the 2Rx4 1.1V DDR5-5600 RDIMMs run at rated speed alongside existing 1Rx8 DDR5-4800 modules in my Supermicro H14DSH?

The board will clock all installed DIMMs to the lowest common speed and apply the loosest timings across channels; mixing 5600 CL46 2Rx4 sticks with 4800 1Rx8 modules therefore forces the kit down to 4800 MHz.

How can I confirm the 256 GB kit is detected at DDR5-5600 CL46 with ECC active after installation?

Enter the BIOS or UEFI and verify the memory frequency reads 5600 MT/s, CAS latency shows 46, total capacity reports 256 GB, and ECC status is reported as enabled or active.

Does the MR44800-724K2 kit include any heatsinks, cables or installation tools, or must those be sourced separately?

The package contains only the two 128 GB DDR5 5600 2Rx4 1.1 V CL46 288-pin ECC Registered RDIMM modules; no heat spreaders, cables or tools are included.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。