我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Two green DDR5 RDIMM modules in anti-static tray

NEMIX RAM

NEMIX RAM DDR5 5600 ECC RDIMM 256GB (2×128GB) CL46 2Rx4 1.1V 288-pin Supermicro H14DSH memory upgrade

SKU CH-XDTF-58WF5

A 256 GB DDR5 ECC RDIMM kit with two 128 GB modules running at 5600 MHz, CL46, 1.1 V, 2Rx4 registered design validated for the Supermicro H14DSH motherboard

  • Capacity256GB (2 x 128GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 256GB 2X128GB

顯示另外 30 款選項
  • 256 GB capacity from two 128 GB modules for maximum server density
  • DDR5 5600 speed with CL46 latency for high-throughput workloads
  • Registered ECC architecture offloads the controller and corrects single-bit errors
  • 1 V operation at 2Rx4 rank for stable fully-populated slots
  • Exact-fit 288-pin RDIMM kit validated for Supermicro H14DSH motherboard

Exact-fit DDR5 kit for Supermicro H14DSH

This 256 GB kit contains two 128 GB DDR5-5600 RDIMMs built to the board's registered ECC specification. It targets administrators who need the full memory capacity the H14DSH can recognise at its rated 5600 MT/s speed.

Registered ECC headroom and population limits

Registered architecture lets every slot run fully populated at 256 GB while ECC corrects single-bit errors on the fly. The 2Rx4 organisation and CL46 timing meet the controller's expectations, but the kit cannot exceed the motherboard's maximum supported capacity or population rules.

DDR5-5600 interface ceiling

The PC5-44800 interface tops out at 5600 MT/s, so bandwidth is capped at that data rate. Systems requiring faster DDR5 speeds or unbuffered UDIMM modules cannot use this registered kit.

商品特色

  • 256 GB capacity from two 128 GB modules for maximum server density
  • DDR5 5600 speed with CL46 latency for high-throughput workloads
  • Registered ECC architecture offloads the controller and corrects single-bit errors
  • 1 V operation at 2Rx4 rank for stable fully-populated slots
  • Exact-fit 288-pin RDIMM kit validated for Supermicro H14DSH motherboard

商品規格

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-724K2
Capacity256GB (2 x 128GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content256GB 2X128GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

其他版本

同系列還有 5 款

同系列產品，記憶體、散熱器或時脈不同 — 下單前請先比較。

商品問答

Will the 2Rx4 1.1V DDR5-5600 RDIMMs run at rated speed alongside existing 1Rx8 DDR5-4800 modules in my Supermicro H14DSH?

The board will clock all installed DIMMs to the lowest common speed and apply the loosest timings across channels; mixing 5600 CL46 2Rx4 sticks with 4800 1Rx8 modules therefore forces the kit down to 4800 MHz.

How can I confirm the 256 GB kit is detected at DDR5-5600 CL46 with ECC active after installation?

Enter the BIOS or UEFI and verify the memory frequency reads 5600 MT/s, CAS latency shows 46, total capacity reports 256 GB, and ECC status is reported as enabled or active.

Does the MR44800-724K2 kit include any heatsinks, cables or installation tools, or must those be sourced separately?

The package contains only the two 128 GB DDR5 5600 2Rx4 1.1 V CL46 288-pin ECC Registered RDIMM modules; no heat spreaders, cables or tools are included.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。