Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Six green DDR5 RDIMM modules in a row

NEMIX RAM

NEMIX RAM DDR5 96GB (6x16GB) 4800MHz CL40 1.1V ECC RDIMM Supermicro H14SSF

SKU CH-4YQ0-3KVPE

A 96GB DDR5 registered ECC kit of six 16GB modules running at 4800MHz CL40 1.1V, validated for the Supermicro H14SSF motherboard

  • Capacity96GB (6 x 16GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 96GB 6X16GB

Vedeți celelalte 24 configurații
  • 96GB total capacity fills six DIMM slots for maximum server density
  • DDR5-4800 speed with CL40 latency delivers rated bandwidth without down-clocking
  • 1V operation reduces power draw across fully populated channels
  • ECC and registered design corrects single-bit errors and stabilises every slot
  • Verified fitment for Supermicro H14SSF motherboard ensures recognised capacity at boot

Exact-Match DDR5 Kit for Supermicro H14SSF

This 96GB kit contains six 16GB DDR5-4800 RDIMMs built to the precise rank, voltage and timing the H14SSF memory controller expects. It is aimed at administrators who need the full capacity recognised immediately without manual tuning. Registered ECC architecture corrects single-bit errors on the fly to protect production workloads.

Registered RDIMM Form Factor and Population Rules

The modules use the 288-pin RDIMM form factor this board requires; they are not UDIMMs or SODIMMs. Buffered signalling offloads the controller so every slot can run fully populated at rated speed. Consult the motherboard manual for the approved DIMM population order and maximum supported capacity before installation.

Sustained Operation at 1.1V CL40

At the rated 1.1V and CL40 the kit maintains stability across all six channels during continuous server loads. ECC correction prevents silent data corruption that would otherwise trigger unplanned reboots. The registered design keeps electrical loading consistent so performance does not degrade as temperatures rise.

Puncte forte

  • 96GB total capacity fills six DIMM slots for maximum server density
  • DDR5-4800 speed with CL40 latency delivers rated bandwidth without down-clocking
  • 1V operation reduces power draw across fully populated channels
  • ECC and registered design corrects single-bit errors and stabilises every slot
  • Verified fitment for Supermicro H14SSF motherboard ensures recognised capacity at boot

Specificații

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-618K6
Capacity96GB (6 x 16GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content96GB 6X16GB DDR5 4800MHz PC5-38400 1Rx8 1.1V 288-PIN ECC RDIMM KIT

Alte versiuni ale acestui model

5 în plus din aceeași gamă

Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.

Întrebări despre acest articol

What limits sustained throughput when all six slots are populated on the H14SSF?

Registered architecture offloads the memory controller so every slot runs fully populated at rated DDR5 4800 speed without downclocking.

How do heat and noise behave with six 1.1 V RDIMMs running continuously?

No heat spreaders are fitted; the modules rely on chassis airflow, and registered DIMMs draw minimal power at 1.1 V, keeping thermal load low.

Which motherboard and DIMM type must already be installed for this kit to work?

A Supermicro H14SSF motherboard with 288-pin DDR5 RDIMM slots is required; UDIMM or SODIMM boards will not accept these modules.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.