暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

NEMIX RAM

NEMIX RAM DDR5 96GB (6x16GB) 4800MHz CL40 1.1V ECC RDIMM Supermicro H14SSF

SKU CH-4YQ0-3KVPE

A 96GB DDR5 registered ECC kit of six 16GB modules running at 4800MHz CL40 1.1V, validated for the Supermicro H14SSF motherboard

  • Capacity96GB (6 x 16GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes
  • 96GB total capacity fills six DIMM slots for maximum server density
  • DDR5-4800 speed with CL40 latency delivers rated bandwidth without down-clocking
  • 1V operation reduces power draw across fully populated channels
  • ECC and registered design corrects single-bit errors and stabilises every slot
  • Verified fitment for Supermicro H14SSF motherboard ensures recognised capacity at boot

Exact-Match DDR5 Kit for Supermicro H14SSF

This 96GB kit contains six 16GB DDR5-4800 RDIMMs built to the precise rank, voltage and timing the H14SSF memory controller expects. It is aimed at administrators who need the full capacity recognised immediately without manual tuning. Registered ECC architecture corrects single-bit errors on the fly to protect production workloads.

Registered RDIMM Form Factor and Population Rules

The modules use the 288-pin RDIMM form factor this board requires; they are not UDIMMs or SODIMMs. Buffered signalling offloads the controller so every slot can run fully populated at rated speed. Consult the motherboard manual for the approved DIMM population order and maximum supported capacity before installation.

Sustained Operation at 1.1V CL40

At the rated 1.1V and CL40 the kit maintains stability across all six channels during continuous server loads. ECC correction prevents silent data corruption that would otherwise trigger unplanned reboots. The registered design keeps electrical loading consistent so performance does not degrade as temperatures rise.

特長

  • 96GB total capacity fills six DIMM slots for maximum server density
  • DDR5-4800 speed with CL40 latency delivers rated bandwidth without down-clocking
  • 1V operation reduces power draw across fully populated channels
  • ECC and registered design corrects single-bit errors and stabilises every slot
  • Verified fitment for Supermicro H14SSF motherboard ensures recognised capacity at boot

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-618K6
Capacity96GB (6 x 16GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content96GB 6X16GB DDR5 4800MHz PC5-38400 1Rx8 1.1V 288-PIN ECC RDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

What limits sustained throughput when all six slots are populated on the H14SSF?

Registered architecture offloads the memory controller so every slot runs fully populated at rated DDR5 4800 speed without downclocking.

How do heat and noise behave with six 1.1 V RDIMMs running continuously?

No heat spreaders are fitted; the modules rely on chassis airflow, and registered DIMMs draw minimal power at 1.1 V, keeping thermal load low.

Which motherboard and DIMM type must already be installed for this kit to work?

A Supermicro H14SSF motherboard with 288-pin DDR5 RDIMM slots is required; UDIMM or SODIMM boards will not accept these modules.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。