Akceptujemy kryptowaluty — posiadane środki można więc wykorzystać na zakup prawdziwego sprzętu.Płatność kryptowalutą — realny sprzęt w zamian. Bezpłatna, ubezpieczona dostawa na całym świecie powyżej 399 $. Neutralne kartony, bez oznaczeń, wysyłane z Niemiec.Bezpłatna, ubezpieczona dostawa powyżej 399 $. Kurs zostaje zablokowany na 30 minut od otwarcia kasy.Kurs zablokowany na 30 minut. Każdy produkt jest fabrycznie zapieczętowany, jego numer seryjny jest sprawdzany, a całość objęta jest 24-miesięczną gwarancją.Zapieczętowane fabrycznie, 24 miesiące gwarancji.

Obserwowane produkty Zaloguj się
Six green DDR5 RDIMM modules in a row

NEMIX RAM

NEMIX RAM DDR5 96GB (6x16GB) 4800MHz CL40 1.1V ECC RDIMM Supermicro H14SSF

SKU CH-4YQ0-3KVPE

A 96GB DDR5 registered ECC kit of six 16GB modules running at 4800MHz CL40 1.1V, validated for the Supermicro H14SSF motherboard

  • Capacity96GB (6 x 16GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 96GB 6X16GB

Pokaż jeszcze 24 konfiguracji
  • 96GB total capacity fills six DIMM slots for maximum server density
  • DDR5-4800 speed with CL40 latency delivers rated bandwidth without down-clocking
  • 1V operation reduces power draw across fully populated channels
  • ECC and registered design corrects single-bit errors and stabilises every slot
  • Verified fitment for Supermicro H14SSF motherboard ensures recognised capacity at boot

Exact-Match DDR5 Kit for Supermicro H14SSF

This 96GB kit contains six 16GB DDR5-4800 RDIMMs built to the precise rank, voltage and timing the H14SSF memory controller expects. It is aimed at administrators who need the full capacity recognised immediately without manual tuning. Registered ECC architecture corrects single-bit errors on the fly to protect production workloads.

Registered RDIMM Form Factor and Population Rules

The modules use the 288-pin RDIMM form factor this board requires; they are not UDIMMs or SODIMMs. Buffered signalling offloads the controller so every slot can run fully populated at rated speed. Consult the motherboard manual for the approved DIMM population order and maximum supported capacity before installation.

Sustained Operation at 1.1V CL40

At the rated 1.1V and CL40 the kit maintains stability across all six channels during continuous server loads. ECC correction prevents silent data corruption that would otherwise trigger unplanned reboots. The registered design keeps electrical loading consistent so performance does not degrade as temperatures rise.

Najważniejsze cechy

  • 96GB total capacity fills six DIMM slots for maximum server density
  • DDR5-4800 speed with CL40 latency delivers rated bandwidth without down-clocking
  • 1V operation reduces power draw across fully populated channels
  • ECC and registered design corrects single-bit errors and stabilises every slot
  • Verified fitment for Supermicro H14SSF motherboard ensures recognised capacity at boot

Specyfikacja

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-618K6
Capacity96GB (6 x 16GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content96GB 6X16GB DDR5 4800MHz PC5-38400 1Rx8 1.1V 288-PIN ECC RDIMM KIT

Inne wersje tego modelu

Jeszcze 5 w tej samej serii

Ta sama rodzina, inna pamięć, inne chłodzenie lub taktowanie — proszę porównać przed decyzją.

Pytania dotyczące tego produktu

What limits sustained throughput when all six slots are populated on the H14SSF?

Registered architecture offloads the memory controller so every slot runs fully populated at rated DDR5 4800 speed without downclocking.

How do heat and noise behave with six 1.1 V RDIMMs running continuously?

No heat spreaders are fitted; the modules rely on chassis airflow, and registered DIMMs draw minimal power at 1.1 V, keeping thermal load low.

Which motherboard and DIMM type must already be installed for this kit to work?

A Supermicro H14SSF motherboard with 288-pin DDR5 RDIMM slots is required; UDIMM or SODIMM boards will not accept these modules.

Także w tym dziale

Klienci porównywali też te produkty

Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.