Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Black 160 by 38 mm DC blower fan with 3 pin connector

OEM Industries

OEM Industries BFB1612H 160x38mm DC Blower 12V 2.15A 3-Pin CPU cooler

SKU CH-398X-NA1JJ

A 160 by 38 millimetre DC blower with 12 volt 2.15 amp draw and three-pin connector

  • ColorBlack
  • TypeFan only
  • Fan Size120mm
  • Bearing TypeBall
  • Power Connector3 Pin
  • LEDNo
  • 12V 2.15A power draw supports strong airflow
  • 160x38mm blower frame moves air through tight channels
  • Ball bearing reduces friction for longer service life
  • 3-pin connector enables speed monitoring on standard headers
  • 120mm impeller diameter fits common mounting patterns

Delta 160x38mm DC Blower

The OEM Industries BFB1612H is a 12 V DC blower measuring 160 by 38 mm with a 120 mm fan diameter. It draws 2.15 A through a three-pin power connector and uses a ball bearing for rotation. The unit is supplied as a fan only in black finish.

Suited for tight 1U or custom ducting

This blower fits builders who need focused airflow through a narrow 160 mm by 38 mm channel and can provide a 12 V, 2.15 A supply on a three-pin header. It is not for systems that require a heatsink assembly, PWM speed control, or a larger frame size.

120 mm fan in 160x38 mm frame

The 120 mm impeller moves air through the 160 by 38 mm housing at the rated 12 V, 2.15 A input. Headroom ends when static pressure exceeds the blower curve or when a four-pin PWM signal is expected for automatic speed regulation.

Puncte forte

  • 12V 2.15A power draw supports strong airflow
  • 160x38mm blower frame moves air through tight channels
  • Ball bearing reduces friction for longer service life
  • 3-pin connector enables speed monitoring on standard headers
  • 120mm impeller diameter fits common mounting patterns

Specificații

ModelBFB1612H
ColorBlack
TypeFan only
Fan Size120mm
Bearing TypeBall
Power Connector3 Pin
LEDNo

Întrebări despre acest articol

What 12 V power header must my motherboard provide for the BFB1612H's 3-pin connector?

A standard 3-pin 12 V fan header capable of supplying at least 2.15 A is required for the blower to start and run at full speed.

Will the 160 mm by 38 mm frame fit in the same mounting holes as my old 120 mm fan?

No, the blower's 160 mm square footprint and 38 mm thickness are larger than a typical 120 mm fan, so new mounting points or a compatible bracket are needed.

How can I confirm the blower is spinning correctly after installation?

Check the BIOS or fan-control software for an RPM reading on the 3-pin header; a steady value above zero shows the ball-bearing motor is running.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.