OEM Industries
OEM Industries BFB1612H 160x38mm DC Blower 12V 2.15A 3-Pin CPU cooler
A 160 by 38 millimetre DC blower with 12 volt 2.15 amp draw and three-pin connector
- ColorBlack
- TypeFan only
- Fan Size120mm
- Bearing TypeBall
- Power Connector3 Pin
- LEDNo
- 12V 2.15A power draw supports strong airflow
- 160x38mm blower frame moves air through tight channels
- Ball bearing reduces friction for longer service life
- 3-pin connector enables speed monitoring on standard headers
- 120mm impeller diameter fits common mounting patterns
Delta 160x38mm DC Blower
The OEM Industries BFB1612H is a 12 V DC blower measuring 160 by 38 mm with a 120 mm fan diameter. It draws 2.15 A through a three-pin power connector and uses a ball bearing for rotation. The unit is supplied as a fan only in black finish.
Suited for tight 1U or custom ducting
This blower fits builders who need focused airflow through a narrow 160 mm by 38 mm channel and can provide a 12 V, 2.15 A supply on a three-pin header. It is not for systems that require a heatsink assembly, PWM speed control, or a larger frame size.
120 mm fan in 160x38 mm frame
The 120 mm impeller moves air through the 160 by 38 mm housing at the rated 12 V, 2.15 A input. Headroom ends when static pressure exceeds the blower curve or when a four-pin PWM signal is expected for automatic speed regulation.
주요 특징
- 12V 2.15A power draw supports strong airflow
- 160x38mm blower frame moves air through tight channels
- Ball bearing reduces friction for longer service life
- 3-pin connector enables speed monitoring on standard headers
- 120mm impeller diameter fits common mounting patterns
사양
| Model | BFB1612H |
|---|---|
| Color | Black |
| Type | Fan only |
| Fan Size | 120mm |
| Bearing Type | Ball |
| Power Connector | 3 Pin |
| LED | No |
이 상품에 대한 질문
What 12 V power header must my motherboard provide for the BFB1612H's 3-pin connector?
A standard 3-pin 12 V fan header capable of supplying at least 2.15 A is required for the blower to start and run at full speed.
Will the 160 mm by 38 mm frame fit in the same mounting holes as my old 120 mm fan?
No, the blower's 160 mm square footprint and 38 mm thickness are larger than a typical 120 mm fan, so new mounting points or a compatible bracket are needed.
How can I confirm the blower is spinning correctly after installation?
Check the BIOS or fan-control software for an RPM reading on the 3-pin header; a steady value above zero shows the ball-bearing motor is running.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
US$0.82
0.0000104BTC
재고 있음