Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Black 80mm square fan with three wire connector

OEM Industries

OEM Industries D08K-12TU 80mm 12V .19A 3 Pin Ball Bearing CPU cooler

SKU CH-7N61-BPCER

An 80 mm ball-bearing fan running at 12 V and 0.19 A with a three-pin connector, sized 80×80×25 mm for the EMP-820 projector

  • ColorBlack
  • TypeFan only
  • Fan Size80mm
  • Bearing TypeBall
  • Power Connector3 Pin
  • LEDNo
  • Reliable airflow from ball-bearing design
  • 12 V operation draws only 0.19 A
  • Fits 80 mm mounting with 25 mm depth
  • Three-pin connector enables speed monitoring
  • Built for EMP-820 projector cooling duties

Compact 80 mm Fan for EMP-820 Projector

This 80 mm ball-bearing fan operates at 12 V and draws 0.19 A through a three-pin connector. It is built to the 8025 form factor and intended as a direct replacement for the original Nidec D08K-12TU unit used in the EMP-820 projector.

No Extra Accessories or Software Included

The package supplies the fan only, without mounting hardware, cables or control software. Installers must reuse existing screws and connect the three-pin header to the projector’s fan header for power and speed reporting.

Three-Pin Voltage Control Limits Speed Adjustment

The three-pin interface allows voltage-based speed regulation but does not support PWM duty-cycle control. This means the fan speed range depends on the host device’s voltage output and cannot be tuned as precisely as a four-pin PWM design would allow.

Puncte forte

  • Reliable airflow from ball-bearing design
  • 12 V operation draws only 0.19 A
  • Fits 80 mm mounting with 25 mm depth
  • Three-pin connector enables speed monitoring
  • Built for EMP-820 projector cooling duties

Specificații

ModelD08K-12TU
ColorBlack
TypeFan only
Fan Size80mm
Bearing TypeBall
Power Connector3 Pin
LEDNo

Întrebări despre acest articol

How often should the ball bearing in the 80mm fan be replaced?

The ball bearing is sealed for the life of the fan and requires no scheduled replacement.

What limits continuous operation of the 12V .19A motor?

The motor is rated for continuous 12V operation; the 0.19A draw is its steady-state limit.

How much noise and heat does the 8025 fan produce when running all day?

The 80x80x25mm frame moves air at 12V with no LED, so acoustic and thermal output stay constant during extended use.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.