Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Black 92mm square cooling fan with 3-pin connector

OEM Industries

OEM Industries F9025S12H 92mm CPU cooler

SKU CH-AXX8-44MX0 MPN F9025S12H

A 92mm sleeve-bearing fan running at 2600 RPM with a 37.5dBA noise rating and 12V 0.30A power draw

  • ColorBlack
  • TypeFan only
  • Fan Size92mm
  • Bearing TypeSleeve Bearing
  • Power Connector3 Wires
  • LEDNo
  • 92 mm fan fits compact CPU coolers
  • 2600 RPM speed moves air through dense fins
  • 5 dBA noise stays low at full load
  • Sleeve bearing runs quietly for daily use
  • 12 V 0.30 A draw works with standard headers

92 mm sleeve-bearing fan for CPU cooling

This 92 mm fan uses a sleeve bearing and runs on 12 V at 0.30 A with a three-wire connector. It spins at 2600 RPM with a 10 percent tolerance and produces 37.5 dBA of noise. The unit is a fan only, supplied without a heatsink or mounting hardware for a complete cooler assembly. Buyers who need an integrated heatsink or liquid-cooling block should look elsewhere.

Simple three-pin connection

Installation requires a standard three-pin motherboard header or fan controller; the connector carries power, ground and a tachometer signal. The sleeve bearing is quiet at low speed but can develop rattle or reduced lifespan if mounted horizontally or exposed to high dust levels. Vibration increases noticeably above the rated 2600 RPM, so avoid over-volting the motor.

Check header current limit and physical clearance

Verify that your motherboard header can supply at least 0.3 A at 12 V without tripping protection. The frame measures 92 by 92 mm with a 25 mm thickness, so confirm the mounting holes match a 90 mm square pattern and that surrounding components allow the full depth. No LED lighting is present, so the fan will not illuminate a windowed case.

Puncte forte

  • 92 mm fan fits compact CPU coolers
  • 2600 RPM speed moves air through dense fins
  • 5 dBA noise stays low at full load
  • Sleeve bearing runs quietly for daily use
  • 12 V 0.30 A draw works with standard headers

Specificații

ModelF9025S12H
ColorBlack
TypeFan only
Fan Size92mm
Bearing TypeSleeve Bearing
Power Connector3 Wires
LEDNo

Întrebări despre acest articol

How do I confirm the F9025S12H is spinning correctly after I connect it?

The fan should run at 2600 RPM with a tolerance of 10% and produce about 37.5 dBA of noise when powered by 12 V.

What comes with the F9025S12H and what must I source separately?

The box contains the 92 mm sleeve-bearing fan with a 3-wire 3-pin connector; mounting screws, a heatsink or a fan controller are not included.

Which version of the 92 mm cooler should I pick for a 12 V header?

The F9025S12H is the 12 V, 0.30 A model with a 3-pin connector; no other voltage or connector variants are listed for this MPN.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.