Akceptujemy kryptowaluty — posiadane środki można więc wykorzystać na zakup prawdziwego sprzętu.Płatność kryptowalutą — realny sprzęt w zamian. Bezpłatna, ubezpieczona dostawa na całym świecie powyżej 399 $. Neutralne kartony, bez oznaczeń, wysyłane z Niemiec.Bezpłatna, ubezpieczona dostawa powyżej 399 $. Kurs zostaje zablokowany na 30 minut od otwarcia kasy.Kurs zablokowany na 30 minut. Każdy produkt jest fabrycznie zapieczętowany, jego numer seryjny jest sprawdzany, a całość objęta jest 24-miesięczną gwarancją.Zapieczętowane fabrycznie, 24 miesiące gwarancji.

Obserwowane produkty Zaloguj się
Black 92mm square cooling fan with 3-pin connector

OEM Industries

OEM Industries F9025S12H 92mm CPU cooler

SKU CH-AXX8-44MX0 MPN F9025S12H

A 92mm sleeve-bearing fan running at 2600 RPM with a 37.5dBA noise rating and 12V 0.30A power draw

  • ColorBlack
  • TypeFan only
  • Fan Size92mm
  • Bearing TypeSleeve Bearing
  • Power Connector3 Wires
  • LEDNo
  • 92 mm fan fits compact CPU coolers
  • 2600 RPM speed moves air through dense fins
  • 5 dBA noise stays low at full load
  • Sleeve bearing runs quietly for daily use
  • 12 V 0.30 A draw works with standard headers

92 mm sleeve-bearing fan for CPU cooling

This 92 mm fan uses a sleeve bearing and runs on 12 V at 0.30 A with a three-wire connector. It spins at 2600 RPM with a 10 percent tolerance and produces 37.5 dBA of noise. The unit is a fan only, supplied without a heatsink or mounting hardware for a complete cooler assembly. Buyers who need an integrated heatsink or liquid-cooling block should look elsewhere.

Simple three-pin connection

Installation requires a standard three-pin motherboard header or fan controller; the connector carries power, ground and a tachometer signal. The sleeve bearing is quiet at low speed but can develop rattle or reduced lifespan if mounted horizontally or exposed to high dust levels. Vibration increases noticeably above the rated 2600 RPM, so avoid over-volting the motor.

Check header current limit and physical clearance

Verify that your motherboard header can supply at least 0.3 A at 12 V without tripping protection. The frame measures 92 by 92 mm with a 25 mm thickness, so confirm the mounting holes match a 90 mm square pattern and that surrounding components allow the full depth. No LED lighting is present, so the fan will not illuminate a windowed case.

Najważniejsze cechy

  • 92 mm fan fits compact CPU coolers
  • 2600 RPM speed moves air through dense fins
  • 5 dBA noise stays low at full load
  • Sleeve bearing runs quietly for daily use
  • 12 V 0.30 A draw works with standard headers

Specyfikacja

ModelF9025S12H
ColorBlack
TypeFan only
Fan Size92mm
Bearing TypeSleeve Bearing
Power Connector3 Wires
LEDNo

Pytania dotyczące tego produktu

How do I confirm the F9025S12H is spinning correctly after I connect it?

The fan should run at 2600 RPM with a tolerance of 10% and produce about 37.5 dBA of noise when powered by 12 V.

What comes with the F9025S12H and what must I source separately?

The box contains the 92 mm sleeve-bearing fan with a 3-wire 3-pin connector; mounting screws, a heatsink or a fan controller are not included.

Which version of the 92 mm cooler should I pick for a 12 V header?

The F9025S12H is the 12 V, 0.30 A model with a 3-pin connector; no other voltage or connector variants are listed for this MPN.

Także w tym dziale

Klienci porównywali też te produkty

Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.