OEM Industries F9025S12H 92mm CPU cooler

92 mm sleeve-bearing fan for CPU cooling

This 92 mm fan uses a sleeve bearing and runs on 12 V at 0.30 A with a three-wire connector. It spins at 2600 RPM with a 10 percent tolerance and produces 37.5 dBA of noise. The unit is a fan only, supplied without a heatsink or mounting hardware for a complete cooler assembly. Buyers who need an integrated heatsink or liquid-cooling block should look elsewhere.

Simple three-pin connection

Installation requires a standard three-pin motherboard header or fan controller; the connector carries power, ground and a tachometer signal. The sleeve bearing is quiet at low speed but can develop rattle or reduced lifespan if mounted horizontally or exposed to high dust levels. Vibration increases noticeably above the rated 2600 RPM, so avoid over-volting the motor.

Check header current limit and physical clearance

Verify that your motherboard header can supply at least 0.3 A at 12 V without tripping protection. The frame measures 92 by 92 mm with a 25 mm thickness, so confirm the mounting holes match a 90 mm square pattern and that surrounding components allow the full depth. No LED lighting is present, so the fan will not illuminate a windowed case.