Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Gray aluminum NVMe enclosure with USB-C cable and adapter, 2.16 inch square

RIITOP

RIITOP NVMETC-DKGY NVMe to USB 3.1 Gen2 10Gbps drive enclosure

SKU CH-AM98-RS9RV

Aluminum tool-free dock turns a single M-key NVMe SSD into a USB 3.1 Gen2 10 Gbps external drive, includes C-to-C cable and C-to-A adapter

  • ColorGray
  • SizeM.2
  • TypeDock
  • AC AdapterNo
  • MaterialAluminum
  • Internal InterfaceM.2 NVME M-Key
  • Tool-free M.2 NVMe installation with included USB-C and USB-A cables
  • 10 Gbps USB 3.1 Gen2 transfer speed for fast external SSD access
  • Aluminium body dissipates heat during sustained NVMe workloads
  • Compact 67 g design fits in a pocket for portable data transfer
  • Supports M-key PCIe NVMe SSDs including Samsung 970 EVO and WD Black

Tool-free NVMe dock for M-key SSDs

The RIITOP NVMETC-DKGY turns a single M.2 PCIe NVMe SSD into an external drive without screws or tools. It accepts M-key NVMe modules only and connects through a USB 3.1 Gen2 Type-C port rated at 10 Gbps. The aluminium body acts as a passive heatsink for the installed drive.

Aluminium shell with fixed USB-C cable

The grey enclosure measures 2.16 by 2.16 by .31 in and weighs 67 g. A captive 12 in USB-C to USB-C cable is included, plus a USB-C to Type-A adapter for legacy ports. No AC adapter is required and there is no fan; the SSD temperature can exceed 60 °C during operation.

Plug-and-play kit with hot-swap limitation

The package supplies the dock, the 30 cm USB-C cable and the Type-A adapter so the drive works on modern and older USB ports immediately. Hot-swap is not supported; the SSD must be inserted before the cable is connected to the host. SATA-based M.2 drives and AHCI NVMe modules are not compatible.

Puncte forte

  • Tool-free M.2 NVMe installation with included USB-C and USB-A cables
  • 10 Gbps USB 3.1 Gen2 transfer speed for fast external SSD access
  • Aluminium body dissipates heat during sustained NVMe workloads
  • Compact 67 g design fits in a pocket for portable data transfer
  • Supports M-key PCIe NVMe SSDs including Samsung 970 EVO and WD Black

Specificații

BrandRIITOP
ModelNVMETC-DKGY (M.2 NVMe SSD to USB C 3.1 Converter Adapter Docking Base, RIITOP USB Type C 3.1 to NVMe Hard Drive Adaptor (Come with USB C-C Cable , C-A Adapter Connector))
ColorGray
SizeM.2
TypeDock
AC AdapterNo
MaterialAluminum
Internal InterfaceM.2 NVME M-Key
External InterfaceUSB Type C
HDD Count SupportedSingle HDD
Number of Bay1
FanNo
SpecificationsType: NVMe USB C Converter Adapter Docking Base. Input: M Key M.2 NMVe slot. Output: USB 3.1 Type C. (Come with USB Type C to C Cable, USB Type C to Type A Adapter Connector) Transfer Speed: Connect with USB 3.1 Port: 10Gbps; Connect with USB 3.0 Port: 5Gbps; Cable length: About 30cm / 12 in.
FeaturesNVMe SSD USB C Converter Adapter. NVMe SSD to USB 3.1 Type C Gen2 10Gbps Hard Drive Adapter. Come with USB Type C to C Cable, USB Type C to Type A Adapter Connector. Plug and Play, no need tools. DO NOT support hot-swap, please NOTE!
Dimensions2.16x2.16x0.31 in
Weight67g / 0.15 lb.
Package Contents1x NVMe to USB Type C Converter Adapter. 1x USB Type C to C Cable (30cm / 12in). 1x USB Type C to A Adapter Connector.

Întrebări despre acest articol

Does the USB 3.1 Gen2 10Gbps interface cap real-world transfer speed?

The USB 3.1 Gen2 link is rated at 10Gbps. Actual throughput depends on the host controller, cable quality and the NVMe drive itself.

What physical space and mounting does the enclosure need?

It measures 2.16 by 2.16 by 0.31 inches and weighs 67g. The aluminum body sits on a desk; no screws or brackets are required.

How is the NVMe SSD installed, and what step do people often miss?

Insert the M-key NVMe SSD into the slot, then connect the USB-C cable. The unit does not support hot-swap, so the drive must be inserted before the cable is plugged in.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.