Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Gray aluminum NVMe enclosure with USB-C cable and adapter, 2.16 inch square

RIITOP

RIITOP NVMETC-DKGY NVMe to USB 3.1 Gen2 10Gbps drive enclosure

SKU CH-AM98-RS9RV

Aluminum tool-free dock turns a single M-key NVMe SSD into a USB 3.1 Gen2 10 Gbps external drive, includes C-to-C cable and C-to-A adapter

  • ColorGray
  • SizeM.2
  • TypeDock
  • AC AdapterNo
  • MaterialAluminum
  • Internal InterfaceM.2 NVME M-Key
  • Tool-free M.2 NVMe installation with included USB-C and USB-A cables
  • 10 Gbps USB 3.1 Gen2 transfer speed for fast external SSD access
  • Aluminium body dissipates heat during sustained NVMe workloads
  • Compact 67 g design fits in a pocket for portable data transfer
  • Supports M-key PCIe NVMe SSDs including Samsung 970 EVO and WD Black

Tool-free NVMe dock for M-key SSDs

The RIITOP NVMETC-DKGY turns a single M.2 PCIe NVMe SSD into an external drive without screws or tools. It accepts M-key NVMe modules only and connects through a USB 3.1 Gen2 Type-C port rated at 10 Gbps. The aluminium body acts as a passive heatsink for the installed drive.

Aluminium shell with fixed USB-C cable

The grey enclosure measures 2.16 by 2.16 by .31 in and weighs 67 g. A captive 12 in USB-C to USB-C cable is included, plus a USB-C to Type-A adapter for legacy ports. No AC adapter is required and there is no fan; the SSD temperature can exceed 60 °C during operation.

Plug-and-play kit with hot-swap limitation

The package supplies the dock, the 30 cm USB-C cable and the Type-A adapter so the drive works on modern and older USB ports immediately. Hot-swap is not supported; the SSD must be inserted before the cable is connected to the host. SATA-based M.2 drives and AHCI NVMe modules are not compatible.

Přednosti

  • Tool-free M.2 NVMe installation with included USB-C and USB-A cables
  • 10 Gbps USB 3.1 Gen2 transfer speed for fast external SSD access
  • Aluminium body dissipates heat during sustained NVMe workloads
  • Compact 67 g design fits in a pocket for portable data transfer
  • Supports M-key PCIe NVMe SSDs including Samsung 970 EVO and WD Black

Specifikace

BrandRIITOP
ModelNVMETC-DKGY (M.2 NVMe SSD to USB C 3.1 Converter Adapter Docking Base, RIITOP USB Type C 3.1 to NVMe Hard Drive Adaptor (Come with USB C-C Cable , C-A Adapter Connector))
ColorGray
SizeM.2
TypeDock
AC AdapterNo
MaterialAluminum
Internal InterfaceM.2 NVME M-Key
External InterfaceUSB Type C
HDD Count SupportedSingle HDD
Number of Bay1
FanNo
SpecificationsType: NVMe USB C Converter Adapter Docking Base. Input: M Key M.2 NMVe slot. Output: USB 3.1 Type C. (Come with USB Type C to C Cable, USB Type C to Type A Adapter Connector) Transfer Speed: Connect with USB 3.1 Port: 10Gbps; Connect with USB 3.0 Port: 5Gbps; Cable length: About 30cm / 12 in.
FeaturesNVMe SSD USB C Converter Adapter. NVMe SSD to USB 3.1 Type C Gen2 10Gbps Hard Drive Adapter. Come with USB Type C to C Cable, USB Type C to Type A Adapter Connector. Plug and Play, no need tools. DO NOT support hot-swap, please NOTE!
Dimensions2.16x2.16x0.31 in
Weight67g / 0.15 lb.
Package Contents1x NVMe to USB Type C Converter Adapter. 1x USB Type C to C Cable (30cm / 12in). 1x USB Type C to A Adapter Connector.

Otázky k tomuto produktu

Does the USB 3.1 Gen2 10Gbps interface cap real-world transfer speed?

The USB 3.1 Gen2 link is rated at 10Gbps. Actual throughput depends on the host controller, cable quality and the NVMe drive itself.

What physical space and mounting does the enclosure need?

It measures 2.16 by 2.16 by 0.31 inches and weighs 67g. The aluminum body sits on a desk; no screws or brackets are required.

How is the NVMe SSD installed, and what step do people often miss?

Insert the M-key NVMe SSD into the slot, then connect the USB-C cable. The unit does not support hot-swap, so the drive must be inserted before the cable is plugged in.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.