SanDisk Optimus GX PRO 850X 1TB M.2 2280-D5-M internal SSD SDSP81100TAH-000E0
- Internal Solid Stat…
- M.2 2280-D5-M
Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.
SanDisk
1TB M.2 2280 NVMe 1.4 SSD with PCIe 4.0 x4 delivering 7300 MB/s read and 6300 MB/s write plus 800,000 random read IOPS
Capacity 1TB
The SanDisk Optimus GX PRO 850X is a 1TB internal SSD built for gaming PCs and creator workstations. It uses the M.2 2280 form factor with a PCIe 4.0 x4 interface and NVMe 1.4 protocol. 3D NAND TLC memory provides the storage foundation for demanding workloads.
This drive delivers maximum sequential read speeds of 7300 MBps and maximum sequential write speeds of 6300 MBps. Random read reaches 800000 IOPS while random write hits 1100000 IOPS. These figures decide if the drive matches your throughput requirements.
The SSD operates between 0°C and 85°C without a heatsink. Average active power draw is 7.2W during reads and 6.2W during writes. Idle consumption sits at 5 mW. Endurance is rated at 600 TBW with an MTBF of 1750000 hours.
| Brand | SanDisk |
|---|---|
| Series | Optimus GX PRO 850X |
| Model | SDSP81100TAN-000E0 |
| Device Type | Internal Solid State Drive (SSD) |
| Form Factor | M.2 2280-S3-M |
| Capacity | 1TB |
| Memory Components | 3D NAND TLC |
| Interface | PCI-Express 4.0 x4 |
| Protocol | NVMe 1.4 |
| Max Sequential Read | Up to 7300 MBps |
| Max Sequential Write | Up to 6300 MBps |
| 4KB Random Read | Up to 800,000 IOPS |
| 4KB Random Write | Up to 1,100,000 IOPS |
| Terabytes Written (TBW) | 600TB |
| MTBF | 1,750,000 hours |
| HeatSink | without HeatSink |
| Power Consumption (Idle) | 5 mW |
| Power Consumption (Active) | Average Active Power Read: 7.2W Average Active Power Write: 6.2W |
| Operating Temperature | 0°C ~ +85°C |
| Storage Temperature | -40°C ~ +85°C |
| Max Shock Resistance | 1,500G @ 0.5 ms half-sine |
| Max Vibration Resistance | Operating Vibration: 5 gRMS, 10-2000 Hz, 3 axes Non-operating Vibration: 4.9 gRMS, 7-800 Hz, 3 axes |
| Height | 2.38mm |
| Width | 22mm |
| Depth | 80mm |
| Weight | 7.5g |
| Greutate la expediere | 0.05 kg |
| Dimensiunile coletului | 127 × 102 × 1 mm |
Alte versiuni ale acestui model
Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.
The 7300 MBps figure is the peak PCIe 4.0 x4 throughput for large-file transfers such as game loads or video scrubbing; real-world speeds depend on system cooling, workload and firmware.
The four-lane Gen 4 link caps sequential throughput at the drive's rated 7300 MBps read and 6300 MBps write; older PCIe 3.0 slots will halve that ceiling.
The single-sided 2280 form factor fits standard M.2 key-M slots in laptops and desktops; no heatsink is included, so verify clearance if your board has a tight cover.
Tot din acest raion
Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.
În ce monedă plătiți și în ce monedă citiți prețurile.
Trimis din portofelul dumneavoastră la finalizarea comenzii
Doar pentru afișare — catalogul este exprimat în dolari
Nicio monedă nu corespunde.
Alegeți limba în care vă vorbește site-ul.
Nicio limbă nu corespunde.
Prima vizită?
Aveți deja un cont?
Nu există o resetare automată: acest magazin nu trimite niciun e-mail, deci nu există niciun link de unică folosință de solicitat. Lăsați adresa în cont. Va fi tratată manual.
Cerere înregistrată
Nu veți primi nimic în căsuța de e-mail — acest magazin nu trimite niciun e-mail. Cineva se ocupă de asta manual.
V-ați amintit-o?