SanDisk Optimus GX PRO 850X 1TB M.2 2280-D5-M internal SSD SDSP81100TAH-000E0
- Internal Solid Stat…
- M.2 2280-D5-M
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
SanDisk
1TB M.2 2280 NVMe 1.4 SSD with PCIe 4.0 x4 delivering 7300 MB/s read and 6300 MB/s write plus 800,000 random read IOPS
Capacity 1TB
Struck-through versions exist but are not stocked here.
The SanDisk Optimus GX PRO 850X is a 1TB internal SSD built for gaming PCs and creator workstations. It uses the M.2 2280 form factor with a PCIe 4.0 x4 interface and NVMe 1.4 protocol. 3D NAND TLC memory provides the storage foundation for demanding workloads.
This drive delivers maximum sequential read speeds of 7300 MBps and maximum sequential write speeds of 6300 MBps. Random read reaches 800000 IOPS while random write hits 1100000 IOPS. These figures decide if the drive matches your throughput requirements.
The SSD operates between 0°C and 85°C without a heatsink. Average active power draw is 7.2W during reads and 6.2W during writes. Idle consumption sits at 5 mW. Endurance is rated at 600 TBW with an MTBF of 1750000 hours.
| Brand | SanDisk |
|---|---|
| Series | Optimus GX PRO 850X |
| Model | SDSP81100TAN-000E0 |
| Device Type | Internal Solid State Drive (SSD) |
| Form Factor | M.2 2280-S3-M |
| Capacity | 1TB |
| Memory Components | 3D NAND TLC |
| Interface | PCI-Express 4.0 x4 |
| Protocol | NVMe 1.4 |
| Max Sequential Read | Up to 7300 MBps |
| Max Sequential Write | Up to 6300 MBps |
| 4KB Random Read | Up to 800,000 IOPS |
| 4KB Random Write | Up to 1,100,000 IOPS |
| Terabytes Written (TBW) | 600TB |
| MTBF | 1,750,000 hours |
| HeatSink | without HeatSink |
| Power Consumption (Idle) | 5 mW |
| Power Consumption (Active) | Average Active Power Read: 7.2W Average Active Power Write: 6.2W |
| Operating Temperature | 0°C ~ +85°C |
| Storage Temperature | -40°C ~ +85°C |
| Max Shock Resistance | 1,500G @ 0.5 ms half-sine |
| Max Vibration Resistance | Operating Vibration: 5 gRMS, 10-2000 Hz, 3 axes Non-operating Vibration: 4.9 gRMS, 7-800 Hz, 3 axes |
| Height | 2.38mm |
| Width | 22mm |
| Depth | 80mm |
| Weight | 7.5g |
| Shipping weight | 0.05 kg |
| Package size | 127 × 102 × 1 mm |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
The 7300 MBps figure is the peak PCIe 4.0 x4 throughput for large-file transfers such as game loads or video scrubbing; real-world speeds depend on system cooling, workload and firmware.
The four-lane Gen 4 link caps sequential throughput at the drive's rated 7300 MBps read and 6300 MBps write; older PCIe 3.0 slots will halve that ceiling.
The single-sided 2280 form factor fits standard M.2 key-M slots in laptops and desktops; no heatsink is included, so verify clearance if your board has a tight cover.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?